Manual Hoover HL H9A2DE-S (page 8 of 114) (English, German, Dutch, French, Italian, Portuguese, Spanish)

705487

Zoom out

Zoom in

1/114

DRAIN HOSE : FITTING

INSTRUCTIONS

To avoid emptying the water container after

each drying cycle, the water can be discharged

directly to a waste water drain pipe (the same

drainage system as household sinks). Water

Bye-Laws prohibit connection to a surface

water drain. The waste water drain pipe should

be located adjacent to the tumble dryer.

The kit consists of:1 hose and 1 tap.

WARNING! Switch off and remove the

tumble dryer plug from the electricity supply

before carrying out any work.

Fit the Hose as Follows:

1. Flip the machine

slowly to the right

side.

2. The waste water

pipe is situated at the

right-hand side of the

machine (see the

picture). A grey hose

connects to the bridge

at the left hand side of

the machine. Using

pliers, remove the

pipe retaining clip

from the bridge.

3. Pull the hose off the

bridge connection.

4. Attach the black

hose from the kit,

(using the connector

a n d p i p e c l i p s

supplied), to the hose

removed from the

bridge connection.

5. Connect the new

drain hose to the waste

Water pipe.

6. Once the machine is

in place, check the

bottom to ensure that

the new hose does not

kink when pushing the

tumble dryer into

position.

Connect to the mains

electricity supply.

Caution: If the product is in different side,

wait at least 4 hours before switching on so

that the oil can flow back into the

compressor. Failure to do this could result

in damage to the compressor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HL H9A2DE-S in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover HL H9A2DE-S Manual

Product: