Manual Hoover hbe 95 x (page 19 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

133576

Zoom out

Zoom in

1/64

- 19 -

become noisier.

• FIXING TO THE WALL

Drill the holes A respecting the distances indicated

(Fig.2). Fix the appliance to the wall and align it in

horizontal position to the wall units. When the appliance

has been adjusted, definitely fix the hood using the

screws A (Fig.4). For the various installations use

screws and screw anchors suited to the type of wall

(e.g. reinforced concrete, plasterboard, etc.). If the

screws and screw anchors are provided with the

product, check that they are suitable for the type of wall

on which the hood is to be fixed.

• FIXING THE DECORATIVE TELESCOPIC FLUE -

EXTRACTOR VERSION

Arrange the electrical power supply within the dimen-

sions of the decorative flue. If your appliance must be

installed as an extractor version, make sure an air ex-

haust hole has been prepared. Adjust the width of the

support bracket of the upper flue (Fig.3).

Then fix it to the ceiling using the screws A (Fig.3) in

such a way that it is in line with your hood and respecting

the distance from the ceiling indicated in Fig.2. Connect

the flange C to the air exhaust hole using a connection

pipe (Fig.4).Insert the upper flue into the lower flue. Fix

the lower flue to the hood using the screws B provided

(Fig.4), extract the upper flue up to the bracket and fix it

with the screws B (Fig.3). To transform the hood from a

ducting version into a filtering version, ask your dealer

for the charcoal filters and follow the installation instruc-

tions.

• FILTERING VERSION

Install the hood and the two flues as described in the

paragraph for installation of the hood in ducting version.

To assemble the filtering flue refer to the instructions

contained in the kit.

The charcoal filters are already fitted to the appliance

(Fig.7).

USE AND MAINTENANCE

• We recommend that the cooker hood is switched on

before any food is cooked. We also recommend that

the appliance is left running for 15 minutes after the

food is cooked, in order to thoroughly eliminate all

contaminated air.

The effective performance of the cooker hood depends

on constant maintenance; the anti-grease filter and the

active carbon filter both require special attention.

• The anti-grease filter is used to trap any grease

particles suspended in the air, therefore is subject to

saturation (the time it takes for the filter to become

saturated depends on the way in which the appliance

is used).

- To prevent potential fire hazards, the anti-grease

filters should be washed a minimum of every 2 months

(it is possible to use the dishwasher for this task).

- After a few washes, the colour of the filters may

change. This does not mean they have to be replaced.

If the replacement and washing instructions are not fol-

lowed, the anti-grease filters may present a fire hazard.

• The active carbon filters are used to purify the air

which is released back into the room. The filters are not

washable or re-usable and must be replaced at least

once every four months. The active carbon filter

saturation level depends on the frequency with which

the appliance is used, the type of cooking performed

and the regularity with which the anti-grease filters are

cleaned.

• Clean the cooker hood frequently, both inside and

outside, using a cloth which has been dampened with

denatured alcohol or neutral,

non-abrasive liquid

detergents.

• The light on the cooker hood is designed for use during

cooking and not for general room illumination. Extended

use of the light reduces the average duration of the bulb.

COMMANDS: (Fig.9)

Push-button A = on/off lights switch

Push-button B = on/off cooker hood switch. The ap-

pliance switches on at speed level 1, If the cooker hood

is on depress the push-button for 2 sec. to switch off

the cooker hood. If the cooker hood is at speed level 1

it will not be necessary to depress the push-button to

switch the cooker hood off. Decreases the motor speed.

Display C = indicates the motor speed level selected

and activates the timer.

Push-button D = switches on the cooker hood. In-

creases the motor speed. Touching the key at 3rd

speed, the intensive function runs for 10', then the

appliance go back to work at the original speed. During

this function the display blinks.

Key E = The Timer times the functions on activation for

15 minutes, after which they are switched off. The Timer

is deactivated by re-pressing Key E. When the Timer is

activated the decimal point must flash on the display.

The “clean air” function is activated by pressing key E

for 2 seconds when the appliance is switched off. This

switches the motor on for 10 minutes every hour at the

first speed. During functioning a rotary movement of

the peripheral segments must be visualised on the

display. When this time has passed the motor switches

off and the fixed letter “C” must be visualised on the

display until the motor re-starts after 50 minutes for

another 10 minutes and so on. Press any key apart from

the light keys to return to normal functioning. Press key

E to deactivate the function.

• Active carbon/grease filter saturation:

- When display item C flashes, at a speed where it

alternates with the letter F (e.g. 1 and F), the grease

filters must be washed.

- When display item C flashes, at a speed where it

alternates with the letter A (e.g. 1 and A), the carbon

filters must be replaced.

After the clean filter has been positioned correctly, the

electronic memory must be reset by pressing button A

for approximately 5 seconds, until the indication F or

A shown on the display C stops flashing.

• COMMANDS: (Fig.8) LUMINOUS the key symbols

are explained below:

A = LIGHT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover hbe 95 x in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover hbe 95 x Manual

Product: