511125
8
Zoom out
Zoom in
Previous page
1/86
Next page
8
EN
EMPTYING THE CYCLONIC CASSETTE
Please empty the cassette after each use of the cleaner or if the cassette-check indicator is illumi-
nated (P17).
Remove the hose from the cleaner (P1).
Press the buttons on the handle (P18) and lift the cyclonic cassette out of cleaner(P19).
Hold the cassette upside down so that the outer lter panel faces upwards. Unlatch then
unhinge the outer lter panel and remove from the cassette(P20). If the lters are dirty refer
to section ‘Cleaning the washable Filters’.
Unlatch the inner lter cover and open the cassette (P21). Carefully tip the contents of the
cassette into a bin.
Use the brush nozzle (P12) when necessary to remove excessive dust from the internal
surface of the cassette.
Close the inner lter cover ensuring the latch is located, replace the outer lter panel ensuring
it is hinged and latched securely (P22 & P23).
Re- t the Freespace cyclonic cassette into the cleaner and push down on the cassette to
secure.
Important: The hose must be removed before removing or replacing the cyclonic cassette.
Remember: The cassette check indicator will also illuminate if an obstruction has occurred. In this
case refer to the section "Removing a blockage from the system".
CLEANING THE WASHABLE FILTERS
IMPORTANT: The cyclonic cassette is tted with 2 lters wich MUST BE CHECKED AND EX-
CESS DUST REMOVED each time the cassette is emptied. To remove dust, tap the lter against
the side of the bin to shake free excess dust.
To maintain optimum cleaning performance the lters MUST BE WASHED at least after EVERY
FIFTH TIME you empty the cassette.
To access the lters:
Remove the cyclonic cassette (P19).
Unlatch then unhinge the outer lter panel (P20).
Remove the foam lter (P24).
Wash the foam lter using warm water (P25). Do not use hot water or detergents. Remove
excess water from the lter and leave to dry fully before re-using.
Gently tap and wash the micro lter attached to the lter frame using warm water (P26). Do
not use hot water or detergents. Remove excess water from the lter and leave to dry fully
before re-using.
To remove the exhaust hepa lter:
A. Unlatch and remove the exhaust lter cover (P27).
B. Remove the exhaust hepa lter.
Gently tap and wash the hepa lter (P28). Do not use hot water or detergents.
Remove excess water from the lter and leave to dry fully before re-using.
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.
6.
7.
0565_5319_d2.indd Sec1:80565_5319_d2.indd Sec1:8 25/03/2008 12:27:1125/03/2008 12:27:11
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover Freespace Cyclonic TFS 7207P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Freespace Cyclonic TFS 7207P in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info