594405
23
Zoom out
Zoom in
Previous page
1/52
Next page
12
7. MAINTENANCE
CLEANING THE NOZZLE
The cleaner’s nozzle can be removed for easy
cleaning.
CAUTION
! !
To reduce the risk of injury from moving parts-
Unplug before servicing. Do not use cleaner
without nozzle in place.
7.1 Pull on nozzle release latch (A) upward.
7.2 Remove nozzle by rotating nozzle.
Rinse nozzle under running water. Remove debris
from squeegee (C) and wipe with a damp cloth.
7.3 To reattach nozzle, tilt cleaner backwards so the
front of the foot is 2-3” off of the floor. Secure upper
handle with one hand and align nozzle squeegee
with base from left to right with your other hand.
7.4 Simply rotate nozzle upward to lock in place.
7.3
7.2
7.1
A
7.4
CLEANING THE BRUSHES
The brush assembly can be removed for easy
cleaning when the nozzle is completely removed.
(See “CLEANING THE NOZZLE” section)
CAUTION
! !
To reduce the risk of injury from moving parts-
Unplug before servicing. Do not use cleaner
without brushes in place.
Remove both tanks to prevent leaking. Set aside.
Remove nozzle (7.1-7.2).
Release foot pedal and tilt cleaner back so handle
rests on floor.
7.5 Push two brush release buttons (B) and
remove the brush assembly.
7.6 The brushes can be washed with a mild
detergent and rinsed. Do not use a solvent based
detergent.
To replace brushes, align post (C) on brush block
with hole (D) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole. Press brush
assembly firmly to snap into place.
Return cleaner to upright position. Replace nozzle
(7.4-7.5), making sure it is locked into position.
Return tanks into proper positions.
7.6
7.5
B
D
C
Any other servicing should be done by an
authorized service representative. If appliance
is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water,
take it to a service center prior to
continuing use.
LUBRICATION
The motor is equipped with bearings which contain
sufficient lubrication for its lifetime. The addition of
lubricant could cause damage. Do not add lubricant
to motor.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover FloorMate Deluxe at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover FloorMate Deluxe in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info