IMPORTANT Always switch off and remove
the plug from the electricity supply before
cleaning this appliance.
Cleaning the Dryer
●Clean the filter and empty the water container
after every drying cycle.
●Regularly clean the condenser.
●After each period of use, wipe the inside of the
drum and leave the door open for a while to
allow circulation of air to dry it.
● Wipe the outside of the machine and the door
with a soft cloth.
● DO NOT use abrasive pads or cleaning
agents.
● To prevent the door sticking or the build up of
fluff clean the inner door and gasket with a
damp cloth after every drying cycle.
WARNING! The Drum, door and load may
be very hot.
CLEANING AND ROUTINE MAINTENANCE
Delay Start Function
Cancelling and Resetting the Programme
To cancel a programme press the button for 3 seconds. In the TIME CONTROL display 0:00
Light will flash to indicate that it has been reset.
The Delay Start Function allows the user to delay the start of the drying cycle by 1 to 24 hours.
When the function is first selected the display will show a delay of 1 hour, subsequent presses of
the button will increase the delay with 1 hour steps.
To commence the programme press and the appliance will complete the drying cycle at the
end of this time. The indicator light will flash to indicate that the start delay is in progress.
OPERATION
14 EN
Drying Guide
Drying Guide
For electrical data refer to the rating label on
the front of the dryer cabinet (with the door open).
WARNING! The Drum, door and load may
be very hot.
EN 61121 Programme
Programme To Use
-DRY COTTON -HANG DRY
-IRON DRY
-HANG DRY + SYNTHETIC
-IRON DRY COTTON
-EASY-CARE TEXTILE
Information for Test Laboratory
Technical Specifications
