Manual Hoover Dynamic - DST10146P-80 (page 16 of 17) (English)

650539

Zoom out

Zoom in

1/17

......................................................................................................................................................................................................................

NOTES

Note: it is advisable to turn off the tap after each wash

to isolate the washing machine from the water supply.

For the washing machine to function properly the terminal end of the discharge hose (mouth)

must be at a minimum of 50 cm and a maximum of 85 cm from the ground.

Electricity supply and safety advice

Washing machines are supplied to operate at a voltage of 230-240V, 50 Hz single-phase.

Check that the conductor is powerful enough to supply at least 3.0 kW, then connect the plug

to a 10A earthed socket.

After installation,the appliance must be positioned so that the plug is accessible.

Check that the electricity supply to your home has an earthing system.

The socket in your home and the plug on the appliance must be of the same type.

It is generally not advisable to use multiple adapters and/or extension leads.

All Hoover washing machines comply with the safety requirements laid down by the Quality

Trademark Institute.

ATTENTION:

should it be necessary to replace the supply cord, connect the wire in accordance with the

following colours/codes:

BLUE - NEUTRAL (N)

BROWN - LIVE (L)

YELLOW-GREEN - EARTH ( )

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Dynamic - DST10146P-80 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoover Dynamic - DST10146P-80

Hoover Dynamic - DST10146P-80 User Manual - English, German - 45 pages

Hoover Dynamic - DST10146P-80 User Manual - Dutch - 45 pages

Hoover Dynamic - DST10146P-80 User Manual - French, Italian - 45 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover Dynamic - DST10146P-80 Manual

Product: