705505
16
Zoom out
Zoom in
Previous page
1/18
Next page
16
NEXT TIME Regular usage
Every time you want to manage the
machine through the App, first you have to
enable the One Touch mode by turning the
knob to the One Touch indicator.
Make sure you have unlocked your phone
(from stand-by mode) and you have
activated the NFC function; then, follow the
steps mentioned earlier.
If you want to start a dry cycle, load
the laundry and close the door.
Select the desired function in the App (e.g.:
starting a programme, the Clever Check-
up cycle, update statistics, etc…).
Follow the instructions on the phone
display, KEEPING IT ON the One Touch
logo on the machine dashboard, when
requested to do so by the App.
NOTES:
Place your smartphone so that the NFC
antenna on its back matches the position
of the One Touch logo on the appliance (as
illustrate below).
If you do not know the position of your NFC
antenna, slightly move the smartphone in a
circular motion over the One Touch logo
until the App confirms the connection. In
order for the data transfer to be successful,
it is essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE THE
FEW SECONDS OF THE PROCEDURE; a
message on the device will inform about the
correct outcome of the operation and advise
you when it is possible to move the
smartphone away.
Thick cases or metallic stickers on your
smartphone could affect or prevent the
transmission of data between machine
and telephone. If necessary, remove them.
The replacement of some components of
the smartphone (e.g. back cover, battery,
etc...) with non-original ones, could result
in the NFC antenna removal, preventing
the full use of the App.
The management and the control of the
machine via App is only possible "by
proximity": it is therefore not possible to
perform remote operations (e.g.: from
another room; outside of the house).
WIRELESS PARAMETERS
With this the Candy Hoover Group Srl,
declares that this appliance marked with
complies with the essential
requirements of the Directive 2014/53/EU.
To receive a copy of the declaration of
c o n f o r m i t y, p l e a s e c o n t a c t t h e
manufacturer at:
www.candy-group.com
Wireless Standard
ISO/IEC 14443 Type A and NFC Forum Type 4
Frequency band
Magnetic field limit
13,553-13,567 MHz (centre frequency 13,560 MHz)
< 42dBμA/m (at 10 meters)
Parameter
Specifications
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover DX C10DCER-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover DX C10DCER-80 in the language / languages: English as an attachment in your email.

The manual is 20,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info