594426

Hoover Dual Power Carpet Cleaner Manual

15
Zoom out
Zoom in
Previous page
1/26
Next page
IMPORTANT
If the sound of the motor changes to a high
pitch, this indicates the dirty water tank is full
and must be emptied.
IMPORTANT
To avoid saturating carpet, do not use more
than 4 wet strokes over one area. Always end
with dry strokes.
For best cleaning results, Hoover recommends to
rinse the carpet with water only. This will remove
residual carpet cleaning solution from your
carpets. To rinse with water only, fill Solution Tank
with water and repeat step 7.
For heavily soiled areas, repeat cleaning process.
Avoid saturating carpet.
NOTE: It is best to alternate wet and dry strokes
as described above.
3.11 Wrap cord around hooks for convenient
storage. Attach the plug end to the cord.
Your carpet washer is equipped with a shut off float
within your dirty water tank. When the dirty water
tank becomes full, the float will rise, shutting off the
air flow thru the nozzle.
Once the float is activated, empty the dirty water
tank. If the dirty water tank does not appear full, turn
the power switch off and wait for the float to settle and
reset. If the float repeatedly shuts off the suction,
empty the dirty water tank. For best results, use only
Hoover
®
brand cleaning solution. Other Solutions
may generate excessive foam which will cause the
float to rise prematurely and shut off the suction. A
higher concentration of shampoo may cause
excessive foaming.
How to Empty
3.12 Grasp dirty water tank handle and push latch to
release.
3.13 To empty dirty water tank, unplug the Quick
Spout Pour Cap (A), rotate it away from drain hole
and empty the Tank.
3.14 Replace Quick Spout Pour Cap after cleaning.
Failure to do so will result in poor suction performance.
DIRTY WATER TANK
3.12
3.14
3.15
3.13
Do not store cleaner with solution in Clean Water
Solution Tank or dirty water in Dirty Water Tank.
Mineral deposits and mildew can form which will
affect the performance of your carpet cleaner.
IMPORTANT
8
Be sure to remove any debris that has
accumulated in the screen above the float. If the
screen becomes clogged, this may reduce the
performance of your cleaner.
IMPORTANT
3.15 Insert dirty water tank back into the cleaner.
3.10 Keep nozzle flat on floor for both forward and
reverse strokes.
For best cleaning results and to aid in faster
drying of carpet, end with more dry strokes.
(Continue using dry strokes until little water is
visible passing through the Dirty Water Tank lid.)
NOTE: Empty Dirty Water Tank when the motor
sound becomes higher pitched and there is a loss
in suction (see “Automatic shut-off”)
CAUTION
Water will drip from the brushes and underside
of the product after use and may puddle. To
avoid damage to wood and laminate flooring
and to avoid potential slip hazard, after use (a)
do not leave the product on wood and laminate
surfaces and remove to a hard surface and (b)
place unit on obsorbant material (such as a
towel) to soak up drips.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover Dual Power Carpet Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Dual Power Carpet Cleaner in the language / languages: English, French as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info