594407

Hoover Classic FloorMate Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
12
BRUSHES: How to Change and Clean
The brush assembly can be removed for easy
cleaning.
How to Remove
Place handle in the upright position.
Remove tanks to prevent leaking. Set aside.
4.6 Pull the two nozzle release buttons (A) out.
Remove nozzle.
Tilt cleaner back so handle rests on floor.
4.7 Push two brush release buttons (B) and remove
the brush assembly.
The brushes can be washed with a mild detergent
and rinsed. Do not use a solvent based detergent.
How to Replace
4.8 To replace brushes, align post (C) on brush block
with hole (D) on bottom of cleaner. Turn brushes
slightly until post fits easily into hole. Press brush
assembly firmly to snap into place.
4.9 Return cleaner to upright position. Replace
nozzle, making sure latches (E) are out.
Align middle section (F) of nozzle with opening (G)
on cleaner.
4.10 While holding nozzle in place, slide latches
inward to lock in place.
Replace tanks.
CAUTION
! !
To reduce the risk of injury from moving parts,
unplug cleaner before servicing.
4.7
4.8
STORAGE
Before storing cleaner:
Turn cleaner OFF and disconnect from electrical
outlet.
• Empty and rinse solution and Dirty Water
Tanks. Allow to air dry.
• Press on upper handle release button to lower
handle for storage.
• Make sure that nothing is pressing on the
nozzle squeegee.
• Do not store cleaner on a wood surface unless
cleaner is completely dry.
LUBRICATION
The motor is equipped with bearings which contain
sufficient lubrication for the life of the motor. The
addition of lubricant could cause damage. Do not
add lubricant to motor bearings.
4.6
A
A
B
D
C
4.9
E
F
G
E
4.10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover Classic FloorMate at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Classic FloorMate in the language / languages: English as an attachment in your email.

The manual is 2,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info