637672
14
Zoom out
Zoom in
Previous page
1/20
Next page
31
ENGLISH
Part 2: For the operator
2.1.h Reading the TEMPERATURES
At any time, with the machine switched ON or OFF, by
pressing the “SI” button you can read, in sequence,
the REAL and PROGRAMMED temperatures for the
water in the tank (t1) and in the boiler (t2).
- Pressing the SIbutton once, the message t1will
be displayed.
-Pressing the SIbutton a second time, the REAL
temperature of the water in the tank will be di-
splayed;
- Pressing the SIbutton a third time, the PROGRAM-
MED temperature of the water in the tank (for the
selected cycle) will be displayed;
- Pressing the SIbutton a fourth time, the message
t2” will be displayed, indicating the boiler;
- Pressing the SI” button a fth time, the REAL tem-
perature of the water in the boiler will be displayed;
- Pressing the SI button a sixth time, the PRO-
GRAMMED temperature of the water in the boiler
(for the selected cycle) will be displayed;
- Pressing the SIbutton a seventh time, the machine
will return to its initial status.
ATTENTION
The operations listed above CANNOT BE CARRIED OUT
DURING A CYCLE.
2.1.i Switching off the washer at the end of the day
At the end of the working day SWITCH OFF the washer
by pressing the “Q1” button.
Switch off the mains switch feeding the machine and
close the water supply taps.
For any repairs, contact only assistance centres
authorised by the manufacturer.
WARNINGS DURING OPERATION
1) Ensure that the washing temperature remains at
approx. 55-60°C;
2) Avoid immersing bare hands in the detergent-lled
water; if this should happen, rinse immediately and
thoroughly with running water;
3) Use only anti-foaming detergents, specics for use
in industrial machines;
4) Deactivate the machine in case of break-down or
malfunction.
For any repairs, contact only assistance centres autho-
rised by the manufacturer, and insist on the use of
original parts.
5) In no case should you change the the original for-
mulations without rst consulting an authorised
assistance centre;
6) When the machine is operating, do not open the door
too rapidly.
7) Wash tank water should be changed at least twice a
day or according to daily wash requirements.
Failure to follow the above warnings may compromise
the safety of the washing machine.
Useful advice for better washing results
Any unsatisfactory results from washing can be seen
when traces of dirt are left on dishes or other items;
any water marks may be caused by insufcient rins-
ing.
In this case, ensure that the rinsing nozzles (27) are
clean and that there is pressure in the water system.
If there are traces of waste, ensure that:
- The lters (22) (23) are clean;
- the water temperature is around 55-60°C;
- items are correctly positioned in the basket;
- the washing nozzles are clean (26);
- the wash arms (24) (25) rotate freely.
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
LC1 LC2 LC3 LC4
I II III IIII
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoonved FW50E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoonved FW50E in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoonved FW50E

Hoonved FW50E User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info