613691
4
Zoom out
Zoom in
Previous page
1/34
Next page
4
General Description of Controls in Your System
Your Honeywell ST9420C provides timing control for both your central heating and
hot water systems, letting you set ON and OFF periods to suit your own lifestyle.
The ST9420C does not directly control the temperature but works together with
other temperature controls, such as room thermostats and cylinder thermostats or
sensors, to control your heating and hot water system in your home.
With 7-day programming and up to 3 on/off periods per day, every day can be set
differently, and heating and hot water can be set at different times from each other.
ST9420C also has a Boiler Service reminder / Shut-down feature, which helps
ensure your gas boiler is regularly serviced in compliance with UK Gas Safety
Regulations. For more details see pages 18 & 19.
Your system includes a DT92E wireless room thermostat and may include a BDR91T
Relay Box to switch your boiler remotely. These products use state of the art 2 way
RF communications to share information and give you robust and flexible control of
your indoor environment.
The following instructions explain how to programme and use the ST9420C, and
associated controls, to provide the most home comfort at the least cost.
The way to use a Programmer
Think about the time periods when you are typically in the house and when you are
not, and also the times when you use a lot of hot water. These are the times you
should use as the basis for the programmes. It will be necessary to allow some
heat up time for the heating system after periods when it has been off – this would
typically be 1 - 1½ hours, depending on your house and your preferences.
If Optimum Start has been selected (see page 17), you do not have to allow for this
heat up time as the Programmer is intelligent and will calculate the correct starting
time for your house. This is based on measurements it makes about your system
characteristics, and on the current and target room temperatures. All you have to do
is programme the time periods when you want to be comfortable.
Other features are commonly available on the Programmer to enhance comfort and
convenience, for example, OVERRIDE, EXTRA HOUR, and MODE buttons.
A typical use of the OVERRIDE feature is when you return home unexpectedly for the
rest of the day and the heating is off. Just press the heating OVERRIDE button and
the heating will come on until the next programme time, at which point it will follow
the normal programme. The advantage here is that you do not have to remember to
switch off because the normal time programme does this for you.
CONTROL OF YOUR SYSTEM
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Y9420S Sundial RF2 Pack 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Y9420S Sundial RF2 Pack 3 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info