585450
13
Zoom out
Zoom in
Previous page
1/19
Next page
Installation and Setup
24
homexpert
tm
by Honeywell THR872CUK Wireless Programmable Thermostat
25
AUTOMANOFF
Activate batteries and test thermostat
Remove thermostat cover and battery compartment cover, then
discard the plastic tab inside to activate the batteries. The first time
you do this, you will be prompted to set the date, time and preferred
screen language. After this, you should check to make sure the
thermostat can communicate with the relay box.
1 Make sure electrical power is on and thermostat is set to
OFF mode (see page 11).
2 Hold the thermostat 2-3 metres from the relay box, then press
and hold the buttons shown at left until TEST TRANSMIT appears.
3 If the system is working properly, a green light on the relay box
should begin flashing. If nothing happens, or if the red light begins
flashing, see “In Case of Difficulty” on page 32.
To exit Test mode at any time, press any MODE button (Auto, Manual
or Off; see page 11).
Press OFF, then press and hold these
buttons to test
Remove cover and discard plastic tab
inside to activate batteries
TEST TRANSMIT
Green light on
relay box should
begin flashing
Choose location and install thermostat
Install the thermostat on a wall or table about 1.2 to
1.5 metres above the floor. To check a location, set the
thermostat to Test mode (see page 24), then check to verify
that the green light on the relay box is still flashing. If it does
not flash, find another location closer to the relay box
• Donotinstallnearsourcesofhotorcoldair(radiators,
windows, heating or cooling ducts).
• Installatleast30cmfrommetalobjects.
• Installatleast1metreawayfromotherelectronicdevices
(TV, sound system, PC, etc.).
Wall mounting
Table stand
assembly
NOTE: This symbol will flash on the screen when battery
power is low. Remove cover as shown at left and replace
batteries with two fresh AA alkaline batteries.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell THR872CUK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell THR872CUK in the language / languages: English as an attachment in your email.

The manual is 4,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info