652395
4
Zoom out
Zoom in
Previous page
1/34
Next page
4
Before you begin
The components of this Honeywell Complete Wireless Weather Station operate at 433MHz radio frequency. No
interconnecting wires are required between the main unit (receiver) and the remote sensors (transmitters).
Note: Your weather station comes with alkaline batteries included in each weather instrument.
To activate each component remove clear protective plastic strip from the battery compartment in the following order:
Anemometer (wind sensor)
Rain Gauge (rain sensor)
IMPORTANT: The Rain Gauge battery compartment locates inside the funnel assembly – please refer to Rain Gauge
setup page in this User Manual.
The First of the Thermo-Hygrometers (temperature and humidity sensor)
The Second of the Thermo-Hygrometers (temperature and humidity sensor)
IMPORTANT: The First of the Thermo-Hygrometer sensors is pre-set for Channel 1 and will start transmitting data on
Channel 1 immediately after protective plastic strip is removed. The Second Thermo-Hygrometer sensor needs to be
set to the Channel 2 or 3 by the user and then powered; otherwise the main unit (receiver) will display data only from
the one sensor.
After all remote sensors are powered you can remove protective plastic strip from the main unit (receiver) battery
compartment.
Power up and test communications between all of the sensors and the main unit BEFORE mounting them outside.
For most applications alkaline batteries are acceptable where temperatures remain above 32°F (0°C).
At temperatures below 32ºF(0ºC) use lithium batteries otherwise transmission performance will be reduced or
interrupted
Avoid using rechargeable batteries. (Rechargeable batteries do not provide correct power levels).
ALWAYS install batteries in the remote sensors before the main unit.
Insert batteries matching the polarity in the battery compartment
Remove plastic sleeve from LCD display (if any).
During an initial setup, place the main unit close to the remote sensors.
After reception is established (all of the remote readings will appear on the main unit’s display), position the remote
sensors and the main unit within the effective transmission range. Ideally they should be placed within the line of sight
of the main unit. See placement tips in the user manual for each remote sensor.
Transmission range may be affected by trees, metal structures and electronic appliances.
The main unit must be placed indoors.
The effective operating range may be influenced by the surrounding building materials and how the receiver (main unit)
and transmitters (sensors) are positioned.
Place the remote sensors so that they face the main unit (receiver), minimizing obstructions such as doors, walls, and
furniture.
Downloaded from www.Manualslib.com manuals search engine
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell TE831W-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell TE831W-2 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info