10
69-1120
Step 4. Program the Thermostat
After the batteries are installed, the thermostat
can be easily programmed in your hand before
it is installed on the wall.
If you would prefer to program the thermostat
after it is installed on the wall, skip to page 20,
and return later to this programming section.
The personal programming chart on pages 12
and 13 may be helpful for planning your
program schedule of time and temperature
settings for various times of the day.
Four time periods are available during week-
days — WAKE, LEAVE, RETURN, and
SLEEP; these periods can be seen individually
on the display as you press the Weekday key.
• WAKE is the time period you want the
house at a comfortable temperature when
you get up and while you get ready for work
or school. (This will be a higher temperature
during heating season, or a lower tempera-
ture during cooling season.)
• LEAVE is the time period you can set for an
energy-saving temperature while you are
away at work or school. (This will be a lower
temperature during heating season, or a
higher temperature during cooling season.)
• RETURN is the time period you want the
house at a comfortable temperature for
activities before bedtime. (Again, higher
heat or lower cool.)
