32641

Honeywell T8611M Manual

13
Zoom out
Zoom in
Previous page
1/28
Next page
13 69-0819
1. Move the system switch to the COOL position, then
follow the same instructions as for the heating program.
2. After programming, adjust fan and system switches
as desired.
3. Press and release RUN PROGRAM key to start the
program.
SETTING THE SYSTEM AND FAN SWITCHES
Fan Switch
Fan switching positions control the fan operation as
follows:
FAN ON: The fan runs continuously. Use for improved
air circulation during special occasions or for more
efficient electronic air cleaning.
FAN AUTO: Normal setting for most zones. The fan
goes on and off with the compressor in heat pump
systems.
System Switch
System switching positions control thermostat
operation as follows:
EM.HT.: The thermostat controls the backup heat only.
The heat pump is off.
HEAT: The thermostat controls your heating system.
AUTO: The thermostat controls either your heating or
cooling system, depending on zone temperature.
COOL: The thermostat controls your cooling system.
OFF: Both the heating and cooling systems are off.
You have finished programming your thermostat. If
you have removed it from the wall to program, replace it
following the procedure on page 18. Read on to learn
about the operating flexibility of your thermostat.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T8611M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8611M in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info