585057
6
Zoom out
Zoom in
Previous page
1/12
Next page
T8602D CHRONOTHERM® IV PROGRAMMABLE THERMOSTATS
69-1510-4 6
Table 3. Thermostat Installer Setup Options.
Select
Installer Setup
Number (Press
Time key to
change)
Factory Setting
Other Choices
(Press or key to change)
Actual
SettingDisplay Description Display Description
Not Used. 1
Fan
operation.
2
(Number 2 must
be set to 1 to
extend fan
operation.)
0 Conventional
applications
where
equipment
controls fan
operation in heat
mode.
1 Heat pump or electric heat
applications where
thermostat controls fan
operation in heat mode.
Not Used. 3
Heating cycle
rate.
4 6 6—6 cph used
for conventional
heat.
1, 3, or
9
1—1 cph used for radiant
floor heat, gravity
system.
3—3 cph used for hot
water systems or high
efficiency furnaces.
9—9 cph used for electric
heat systems.
Not Used. 5 thru 11
System
setting
adjustment
12 1 Manual
changeover
0 or 2 0—Auto changeover
2—Auto only
Adaptive
Intelligent
Recovery™
control.
13 1 Conventional
recovery
(system starts
recovery at
programmed
time).
Adaptive Intelligent
Recovery™ control is
activated (system starts
early so setpoint is
reached by start of
program period).
Not Used. 14 thru 15
Clock format. 16 0 12-hour clock
format.
1 24-hour clock format.
Not Used. 17 thru 23
Outdoor
temperature
display
(select
models).
24 0 No outdoor
temperature is
displayed.
1 Outdoor temperature is
displayed. Needs a
C7089B1000 Outdoor
Temperature Sensor to
operate.
Not Used. 25 thru 32
Minimum off
time for the
compressor.
33 5 5 minute
minimum off time
for the
compressor.
0 thru 4 Minimum number of
minutes (0 thru 5) the
compressor will be off
between calls for the
compressor.
Temperature
range stops
in heating.
34 32.0 Highest setting
for heating
setpoint.
4.5 to
31.5
Temperature range (0.5°C
increments) of heating
setpoint settings.
Temperature
range stops
in cooling.
35 7.0 Lowest setting
for cooling
setpoint.
7.5 to
37.0
Temperature range (0.5°C
increments) of cooling
setpoint settings.
Not Used. 36
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T8602D Chronotherm IV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8602D Chronotherm IV in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info