585052
8
Zoom out
Zoom in
Previous page
1/12
Next page
69-1567
8
T8602C CHRONOTHERM
®
IV DELUXE PROGRAMMABLE THERMOSTATS
Refer to Table 5 for the directions and results of the
specific tests.
Table 5. Installer System Test Options.
NOTE: Press any key and the displayed numbers will change. Press Time to go to the previous test and Time
to go to the next test. The Run Program key will not exit this test. Press Time or Time and then the
Run Program key to exit.
THERMOSTAT INFORMATION
1. Press the Time key to access the thermostat
information.
2. Press the increase s key to display the production
date code. The first two large digits are the month
and the third digit is the last digit of the year
(Example: 027 = February 1997).
3. Press the increase key again to display the
software identification code. (Example: 02 =
software ID code 2)
M14613
NOTE: Press Time to advance to the next test and
Time to go back to the previous test. Press
Run Program to exit the system test.
4. Press the increase key again to display the
software revision number (Example: 001 =
Revision number 1).
5. Press the increase key again to display the
EEPROM identification code. (Example: 314 =
EEPROM ID 314)
6. Press the Run Program key to exit the system
test. The system test times out after four minutes
without any key presses.
M14614
M14615
M14616
M14617
Key to
Press
Test
Number Description
Heating Equipment System Test
Time 10 Enter heating equipment system test.
11 Heat comes on. When Installer Setup number 2 is 1, the system fan is also energized.
10 Heat and system fan turn off.
Cooling Equipment System Test
Time 30 Change from heating to cooling equipment system test.
31 Cool and system fan come on.
30 Cool and system fan turn off.
Fan Equipment System Test
Time 40 Change from cooling to fan equipment system test.
41 Fan comes on.
40 Fan turns off.
Key Operation System Test
Time
60 2 Change from fan to key operation system test.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T8602C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8602C in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell T8602C

Honeywell T8602C User Manual - English - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info