Manual Honeywell T8131A (page 13 of 24) (English)

32663

Zoom out

Zoom in

1/24

69-1636-1

Adjust Fan Operation Switch

³ The thermostat fan operation switch,

labeled FUEL SWITCH (see illustration on

page 14), is factory-set in the F position.

This is the correct setting for most

systems. If your system is an electric heat

system, set the switch to E. The E setting

allows the fan to turn on immediately with

the heating or cooling in a system where

the G terminal is connected.

Adjust System On-Time,

³ The thermostat on-time is factory-set for

a warm air, gas or oil heating system. If

you are installing it on another type of

system, adjust the on-time accordingly by

setting DIP switches 1 and 2 on the back

of the thermostat. Use the heating

system table on the thermostat back as a

guide.

Optimize the system on-time according to the

type of system to minimize room temperature

swings.

In the unlikely event that you want a longer

furnace on-time, readjust DIP switches 1 and 2

as follows:

•Warm Air Furnace—set at the Hot Water

setting (1—OFF, 2—ON).

• Electric Furnace—leave at the Warm Air

Furnace setting (1—ON, 2—OFF).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T8131A in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell T8131A Manual

Product: