32591
10
Zoom out
Zoom in
Previous page
1/16
Next page
69-0860—1
T7525/T7526 THERMOSTAT TOUCHPAD
6
USING THE TOUCHPAD
Change the Program Setpoint Temperatures
You can change the setpoint temperature. Follow these steps:
1. From the Base screen, press the Options soft key. The screen displays the first
Options menu.
2. Press the More soft key. The screen displays the second Options menu.
3. Press the Climate Control soft key. The screen displays the Climate Control
menu.
4. Press the Settings and Schedules soft key. The screen displays the Settings
and Schedules menu.
5. Press the or soft key repeatedly until the desired selection (Weekday,
Saturday, or Sunday) displays.
6. Press the Temperature Settings soft key. The screen displays the current
settings for each period for the selected day.
NOTE: H refers to the heating setpoint; C refers to the cooling setpoint.
7. Press the soft key for the period to be changed. The screen displays the settings
for that period.
8. Press the Change Heat or Change Cool soft key until the desired setpoint type
(Heat or Cool) is displayed.
9. Press the or soft key repeatedly until the desired temperature setting
displays. The setpoint temperature range is 45° to 88°F (7° to 31°C).
10. Perform one of the following:
a. To accept the new setting, press the Select key or do not press a key for
one minute. The screen displays the current settings for the selected day.
b. To cancel the temperature entered in step 9, press the Back key within one
minute. The screen displays the current settings for the selected day.
NOTE: For systems using the T7525C/T7526C Thermostat Touchpads (auto
changeover), a minimum 3 degree F (2 degree C) deadband is
maintained between the heating and cooling setpoints. If either setpoint
is adjusted into the deadband, the other setpoint will automatically
change to maintain the minimum 3 degree F differential.
11. Repeat steps 7 through 10 for any other heating or cooling setpoints that need to
be changed.
12. Press the Select key. The screen displays the Settings and Schedules menu.
13. Repeat steps 4 through 11 for any other days that need to be changed.
14. Press the Select key repeatedly until the Base screen displays.
Base Screen
M8625A
Set: C: 80
o
Actual: 80
o
Rate: NORMAL
12:25PM Mon
Warmer
Cooler
Options
Next
Select
Back
First Options Menu
M8626A
Options
Hold Temperature
More
Select
Back
Second Options Menu
M8627A
Options
Run Schedule
Climate Control
Present Time/Day
More
Select
Back
Climate Control Menu
M8628A
Climate Control
Settings and Schedules
Heat/Cool Equipment
Ventilation
Select
Back
Settings and Schedules Menu
M8629A
Settings and Schedules
Weekday
Temperature Settings
Day Schedule
Select
Back
Current Settings Screen
M4472
Sunday Settings
Wake H: 70˚ C: 78˚
Leave H: 62˚ C: 78˚
Return H: 70˚ C: 78˚
Sleep H: 64˚ C: 78˚
Select
Back
M8630A
Weekday-Leave Settings
Heat: 62
o
Change Cool
Select
Back
Current Period Settings Screen
(Change Cool Shown)
Step 1
Step 2
Step 3
Step 4
Step 5
Steps 6 & 7
Steps 8-10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell T7526 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell T7526 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info