19
69-1575
your utility company. If you notice the tempera-
ture in your home is higher or lower than the
setting you programmed into the thermostat,
check the thermostat display. To indicate the
equipment is under DLC, the thermostat
displays the word SAVING. You cannot control
the heating/cooling equipment when it is under
DLC.
When the utility releases your thermostat from
DLC, your heating or cooling equipment may
not be immediately available. To prevent
damage to your heating and cooling equipment
and to allow the utility to bring the equipment
on-line effectively of all homes that subscribe to
DLC, your thermostat automatically calculates
and initiates a time delay before the heating or
cooling equipment comes on. You cannot
override this time delay.
Time-of-Use Pricing
If you subscribe to Time-of-Use Pricing, the
thermostat displays the rate in effect, see Fig. 1.
You cannot adjust which rate is in effect; you
can only adjust the temperature offset value for
each rate. Refer to Programming Your Thermo-
stat section for information on setting the offset
value for Time-of-Use Pricing. To notify you a
rate change will be occurring, the Time-of-Use
indicator on the thermostat begins blinking one-
half hour before the rate change takes effect.
