613692
28
Zoom out
Zoom in
Previous page
1/34
Next page
28
How reliable is 2-way RF communication?
The 2-way RF communication (also known as wireless communication) used by
Honeywell is extremely robust and reliable. When installed correctly the Signal
Strength test feature allows the Installer to locate the system components where
mutual signal reception is strong. During communication, signals are sent several
times to ensure receipt, and if any message is garbled, the error detection software
recognises this and ensures the message is repeated again.
What do I do if RF communication is lost?
Follow the steps in the Troubleshooting Guide on the next page. The most likely
cause for loss of communications is the DT92E batteries running low on power. This
will be indicated on the DT92E display by a flashing battery symbol, or the display
may even be blank. Simply replace the batteries (as shown on page 21) and wait a
few minutes for communications to become re-established.
If this does not resolve the problem it may be that the RF signal path between
the ST9420C and the DT92E is blocked by a metal object. Check the direct path
between the two devices and reposition any object that may be blocking the signal,
or move the thermostat.
How do I know when to change the batteries in the CS92A
cylinder sensor?
If the CS92A batteries need changing, the ST9420C will show the message “SENSOR
LOW BATT” and the tap symbol
will flash. You can confirm this by pressing the
CS92A button, whereupon the red light will give a brief flash every second to indicate
a low battery state. It is important to change the CS92A batteries as soon as the low
battery condition is indicated, as reduced battery power may affect the RF signal
strength and impair RF communications.
How do I know when to change the batteries in the DT92E
room thermostat?
If the DT92E batteries need changing, the battery symbol will flash on the DT92E
display. DT92E will continue to operate for at least 4 weeks after the indicator begins
to flash. The ST9420C will also show the message ‘SENSOR LOW BATT’ and the
radiator symbol
will flash. It is important to change the DT92E batteries as soon
as the low battery condition is indicated, as reduced battery power may affect the
RF signal strength and impair RF communications.
FAQ AND TROUBLESHOOTING
28


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-st9420c

Reset search

  • Switched heating to off but it remains on. Taken out batteries from thermostat and heating still on Submitted on 31-7-2021 at 20:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell ST9420C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9420C in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info