613692
25
Zoom out
Zoom in
Previous page
1/34
Next page
25
OPERATING YOUR CS92A HOT WATER THERMOSTAT
Basic Operation
Your CS92A consists of a sensor element that
is strapped to the metal surface of the hot
water cylinder and a wireless transceiver box
that is normally mounted on a wall surface
apart from the cylinder. The transceiver
communicates with the ST9420C programmer
and regularly sends the hot water temperature
measurement to it.
Battery Replacement
The CS92A batteries should last for a minimum of 2 years. Well before they run out,
CS92A will communicate with ST9420C and it will show the message ‘SENSOR LOW
BATT’ whilst also flashing the tap symbol.
Batteries are accessed by
unclipping the front cover
at the bottom. Note battery
polarity. Reverse process
to refit front cover.
Use 2xLR6 (AA) alkaline
batteries only.
Error Indications
To save battery power, CS92A will indicate
error conditions on the LoT™ Display of
ST9420C. It is possible to view the CS92A sta-
tus by pressing the button on the transceiver
box. The lights underneath this button will
provide feedback as shown in the table. Go
to the FAQ AND TROUBLSHOOTING section
for more information.
1
2
Sensor element Transceiver
Green Light Red Light Status
On Flashes up to 5 times in
succession, then repeats
Everything is OK, red light shows signal
strength - press button again to exit
Off Flashes 0.1 s on, 0.9 s off Battery low condition, replace batteries
Off Flashes 0.5 s on, 0.5 s off Sensor error, check sensor connection
Off On continuously Loss of communications
25


Need help? Post your question in this forum.

Forumrules
1

Forum

honeywell-st9420c

Reset search

  • Switched heating to off but it remains on. Taken out batteries from thermostat and heating still on Submitted on 31-7-2021 at 20:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell ST9420C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST9420C in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info