Manual Honeywell ST6400A (page 2 of 2) (English)

613698

Zoom out

Zoom in

1/2

SETTING YOUR PROGRAMMER

SETTING THE CORRECT TIME

To set the correct time, open the ap on the front

of the programmer.

STEP1

Move the setting

slider to the SET

TIME position. The

time on the display

will now be ashing

to indicate it can be

changed.

STEP 2

To change the time, press the + or

buttons until

the correct time is displayed.

Each press of the button will change the time by

one minute. Holding the button down for more

than a few seconds will change the time slowly at

rst, then quickly.

STEP 3

Moving the setting slider to the next position com-

pletes setting the time.

SETTING THE HOT WATER PROGRAMME

The hot water programme has two ON/OFF

switching times per day. Each time can be set

between 3.00 am and 2.50 am (on the next day)

to allow you to programme the hot water to stay

on past midnight, if required.

STEP 4

Move the setting slider to the SET HOT WATER

position. The words HOT WATER will now be vis-

ible on the display and the rst ON time will now

be ashing.

STEP 5

Use the + and

buttons to set the rst ON time.

Each press of the button will change the time by

10 minutes.

STEP 6

Press the NEXT ON/OFF button once to display

the rst OFF time. Set this time using the + and

buttons.

STEP 7

By pressing the NEXT ON/OFF and + or

but-

tons the remaining ON/OFF times can be set.

*NOTE*

1. When pressing the + button, the next ON or

OFF marker may start to ash. If this hap-

pens the next programme time will have been

changed. Press the NEXT ON/OFF button to

check and adjust this programme time if nec-

essary.

2. When pressing the

button, the previous

ON or OFF marker may start to ash. If this

happens the previous programme time will

have been changed. Follow the procedure

in “REVIEWING PROGRAMME TIMES” to

check and adjust this time if necessary.

Moving the setting slider to the next position com-

pletes setting the hot water programme.

SETTING THE HEATING PROGRAMME

The heating programme has two ON/OFF switch-

ing times per day. Each time can be set between

3.00 am and 2.50 am (on the next day) to allow

you to programme the heating to stay on after

midnight if required.

STEP 8

Move the setting slider to the SET HEATING posi-

tion. The word HEATING will now be visible on

the display and the rst ON time will be ashing.

STEP 9

The required heating programme can now be set

by following the same procedure as “SETTING

THE HOT WATER PROGRAMME” in steps 5 to 7.

STEP 10

Moving the setting slider to the next position com-

pletes setting the heating programme.

REVIEWING PROGRAMME TIMES

To review your hot water programme move the

setting slider to the SET HOT WATER position.

To review your heating programme move the set-

ting slider to the SET HEATING position.

To review the programme times press the NEXT

ON/OFF button repeatedly. Any of these times

can be adjusted by using the + and

buttons.

+ AND

BUTTONS

LCD

DISPLAY

ON/OFF

MARKER

HOT WATER

INDICATOR

OVERRIDE

BUTTONS

HEATING

INDICATOR

EXTRA HOUR

BUTTONS

HEATING

SLIDER

SETTING

SLIDER

HOT WATER

SLIDER

NEXT ON/OFF

BUTTON

RESET

IF DISPLAY REMAINS BLANK AFTER SWITCH ON - PRESS RESET

3.00am

4.00am

5.00am

6.00am

7.00am

8.00am

9.00am

10.00am

11.00am

12.00am

1.00pm

2.00pm

3.00pm

4.00pm

5.00pm

6.00pm

7.00pm

8.00pm

9.00pm

10.00pm

11.00pm

12.00pm

1.00am

2.00am

3.00am

HOT WATER

HEATING

BUILT-IN PROGRAMME

3.00am

4.00am

5.00am

6.00am

7.00am

8.00am

9.00am

10.00am

11.00am

12.00am

1.00pm

2.00pm

3.00pm

4.00pm

5.00pm

6.00pm

7.00pm

8.00pm

9.00pm

10.00pm

11.00pm

12.00pm

1.00am

2.00am

3.00am

HOT WATER

HEATING

PERSONAL PROGRAMME

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell ST6400A in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell ST6400A Manual

Product: