471561
2
Zoom out
Zoom in
Previous page
1/4
Next page
RLV430 69-1855-1 2008-01-29 2/4
2) Mount the thermostat
Push the excess wires back
inside the electrical box.
Secure the thermostat to the
electrical box using the provided
screws.
Insert the screws through either
the right or left pair of mounting
holes on the thermostat.
3) Complete the installation
NOTE: If there is a protective film or sticker on the thermostat’s
screen, peel it off.
Apply power to the heating system. Verify the installation by checking
that the heater can be turned On and Off by raising and lowering the
setpoint using the Up and Down buttons.
WARNING: Keep the thermostat's air vents clean and free from
obstructions.
The thermostat normally displays the room (measured) temperature.
To view the set temperature (setpoint), press the Up or Down
button once.
To change the setpoint, press the Up or Down button until the
desired setpoint is displayed.
The factory settings are inside the shaded cells of the following table.
WARNING: The clock loses its setting whenever you change the
thermostat’s configuration.
Temperature display
To change the temperature display between °C and °F:
n Open the thermostat’s door.
o Press and hold the Day button.
p Insert a pointed object (e.g., paperclip) in the reset opening.
Remove it when the thermostat’s screen becomes blank.
q Wait one second and release the Day button.
Time display
To switch between the 12-hour format and the 24-hour format:
n Open the thermostat’s door.
o Press and hold the Hour button.
p Insert a pointed object (e.g., paperclip) in the reset opening.
Remove it when the thermostat’s screen becomes blank.
q Wait one second and release the Hour button.
Control type
Use proportional control (default setting) in most cases as it pro-
vides better temperature control.
Use conventional control if you have a fan-forced heater.
Fan is displayed when conventional control is selected. To switch
between the two types of control:
n Open the thermostat’s door.
o Press and hold the Min button.
p Insert a pointed object (e.g., paperclip) in the reset opening.
Remove it when the thermostat’s screen becomes blank.
q Wait one second and release the Min button.
The clock must be set when Time flashes on the
screen.
n Open the thermostat’s door.
o Press the Day button to set the day.
p Use the Hour and Min buttons to set the clock.
q Press the button to exit.
The thermostat has three modes of operation:
Automatic (programmable) mode
To use the Automatic mode, press the Mode button
until Auto is selected (outlined) on the screen. The cur-
rent period number will appear.
In this mode, the thermostat automatically adjust its
temperature setpoint according to the period of the day
(wake up, leave for work, return home and sleep).
You can program up to 4 periods in a day. You can set 2 different
programs: one for the weekdays (Monday to Friday) and another one
for the weekend (Saturday and Sunday).
p
Temperature Display and Setting
3.
q
Configuration
4.
Temperature display °C °F
Time display
24 h 12 h
Temperature control
Proportional
(15-second cycles)
Conventional
(± 0.5°C deadband)
r
Clock and Day Setting
5.
s
Modes of Operation
6.
400-104-009-C_69-1855-1 (RLV430 Honeywell TH104) ENG.fm Page 2 Tuesday, January 29, 2008 4:20 PM
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell RLV430 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell RLV430 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info