Manual Honeywell OMNI-408 (page 18 of 32) (English)

580317

Zoom out

Zoom in

1/32

– 18 –

Paging Feature (cont’d)

1. Access pager number programming by pressing in sequence the

[#], [5], and [8] keys. An acknowledgement tone sounds to indicate

pager number programming has been accessed.

The [#], [5], [8] command is accessible only while the system is disarmed and the

dialer, dialer delay, and bell are not active.

LCD keypads will display the existing pager phone number.

2. Enter your new pager phone number. Your new pager phone

number may consist of up to 16 characters (1-9, 0). It may be

necessary to add time to allow the pager to answer before dialing

your pager number. To enter a 2-second pause, press the [CODE]

key. (Entering a 2-second pause is optional and is not required to

enter your pager phone number.) If the [CODE] key was pressed,

it counts as one character. The keypad will emit a single

acknowledgement chirp as each number is pressed.

3. Press the [#] key after you have made your pager phone number

changes. Pressing the [#] key saves your new pager number and

nulls out the remaining locations. An acknowledgement tone

sounds.

To exit without saving changes, press the [✴] key to exit pager phone

number programming. An acknowledgement tone sounds to indicate

pager number programming has been exited.

If you press the [✴] key without first pressing the [#] key to save your new pager

phone number, the system exits the pager phone number programming mode

without saving the changes.

If no key is pressed within 10 seconds, the pager phone number programming

mode times out and exits automatically without saving any information entered.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell OMNI-408 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell OMNI-408 Manual

Product: