32541
10
Zoom out
Zoom in
Previous page
1/20
Next page
69-0654S310
Paso 7
MONTE LA PLACA DE MONTAJE DEL TERMOSTATO
Coloque la placa de montaje sobre la pared. Utilice un nivel
para asegurarse de que la placa de montaje está nivelada.
Utilice un lápiz para marcar los dos orificios de montaje.
Quite la placa de montaje de la pared, y taladre orificios de 3/16" en la pared (si es de tabla roca)
como estén marcados. En materiales más firmes como son paredes con yeso o la madera, taladre
orificios de 7/32". Introduzca los taquetes (que se proveen) en los orificios, golpeándo levemente
sobre ellos, hasta que estén al ras de la pared.
Coloque de nuevo la placa de montaje sobre los orificios, y tire de los cables a través de la abertura
para cableado. Inserte holgadamente dos tornillos de montaje dentro de los orificios.
Nivele para propósitos de apariencia únicamente; el termostasto funcionará apropiadamente aun si
no está nivelado. Apriete los tornillos de montaje.
Paso 8
CONECTE LOS TERMINALES DEL TERMOSTATO
NOTA: Todas las conexiones del cableado deben
cumplir con los códigos y disposiciones locales. Si no
está seguro sobre que procedimientos utilizar en el
cableado doméstico, llame a su contratista local de
calefacción-acondicionamiento de aire.
Consulte las etiquetas de cinta adhesiva que colocó
en los cables cuando quitó su termostato anterior.
Haga que coincida la letra del cable de su termostato
anterior con el terminal de la letra correspondiente que está en la parte posterior de su termostato.
Consulte las ilustraciones de las páginas 11. Sostenga el termostato como se muestra, para
minimizar la necesidad de usar extensiones de cable. Si los cables están aún demasiado cortos,
utilice conectores de cable (que compre localmente) para alargar los cables. Vea la figura
(izquierda) que muestra los lineamientos para el uso de extensiones de cable.
En las instalaciones de 5 cables únicamente, asegúrese de quitar el puente que conecta los
terminales R y Rc, que está instalado de fábrica.
PARED
CABLES QUE ATRAVIESAN
POR LA ABERTURA
DE LA PARED
TAQUETES
PARA PARED (2)
PLACA
DE MONTAJE
TORNILLOS
DE MONTAJE (2)
MS1718
NIVEL
MS1714A
MS1715A
CABLE
PROCEDENTE
DE LA PARED
TRAMO DE 6"
(152 MM) DE
CABLE CALIBRE
18 PARA
TERMOSTATO.
HAGA COINCIDIR
LOS COLORES DE
AISLAMIENTO O
MARQUE EL
EXTREMO DE
LOS CABLES.
OBTURADOR DE CABLE
DE TAMAÑO PARA DOS
CABLES CALIBRE 18
MÉTODO PARA INCREMENTAR
LA LONGITUD DEL CABLE
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell MAGICSTAT_33 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell MAGICSTAT_33 in the language / languages: Spanish as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell MAGICSTAT_33

Honeywell MAGICSTAT_33 User Manual - English - 24 pages

Honeywell MAGICSTAT_33 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info