32471
15
Zoom out
Zoom in
Previous page
1/20
Next page
15 69-0653S4
SI... ENTONCES...
La imagen no se enciende Designe el interruptor del sistema en la posición
OFF; quite las baterías; instálelas al revés
durante 5 segundos cuando menos, para que el
termostato se restablezca; coloque de nuevo
las baterías correctamente. Debe encenderse la
imagen.
Asegúrese de que las baterías sean nuevas y
estén instaladas correctamente.
Limpie con cuidado los contactos de las
baterías utilizando el borrador suave de un
lápiz. No utilice ningún abrasivo para limpiar los
clipes.
La imagen de la temperatura no baja de
45°F (7°C) ni sube de 88°F (31°C) durante
la programación.
Se ha llegado al límite de designación de
temperatura. El rango de designación es de 45
a 88°F (7 a 31°C).
Los cambios de temperatura ocurren a
una hora incorrecta.
Revise las horas del programa del período en
cuestión. Asegúrese de que las indicaciones de
AM y PM sean correctas. Asegúrese de que el
día y la hora actuales sean correctas. Programe
de nuevo si es necesario.
La calefacción no se enciende. Revise que el interruptor del termostato esté
designado en la posición HEAT.
Si la imagen está en blanco o muestra "bAtLo",
instale baterías nuevas.
Si la temperatura designada es mayor que la
temperatura actual y el indicador SYSTEM ON
(SISTEMA ENCENDIDO) se enciende, llame al
Centro Honeywell de Asistencia al Cliente al 1-
800-468-1502.
La refrigeración no se enciende. Revise que el interruptor del termostato esté
designado en la posición COOL.
Revise los fusibles del sistema o el interruptor
térmico de circuito y reemplácelos o
restablézcalos si es necesario.
Revise que el cableado sea el correcto y que
esté bien conectado.
Conecte un puente entre los cables Rc y Y: Si
la refrigeración no se enciende, póngase en
contacto con su distribuidor de sistemas de
refrigeración.
Si la imagen está en blanco o muestra "bAtLo",
instale baterías nuevas.
El termostato tiene integrado un retraso en la
hora de refrigeración. Tendrá que esperar entre
5 y 10 minutos después de cambiar la
designación, para que el acondicionador de aire
empiece a funcionar.
Asegúrese de que el interruptor de desconexión
del exterior tiene energía (está encendido)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell MAGICSTAT_32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell MAGICSTAT_32 in the language / languages: Spanish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell MAGICSTAT_32

Honeywell MAGICSTAT_32 User Manual - English - 24 pages

Honeywell MAGICSTAT_32 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info