Manual Honeywell HZ-970 Series (page 6 of 24) (English, French, Spanish)

724039

Zoom out

Zoom in

1/24

Fig. 5

SAFETY FEATURES

The Honeywell Infrared Heater is equipped with several devices and features for added protection:

• Cool to touch housing and handle.

• A four way tip-over switch that disables the heater if it is accidentally tipped in any front, back or side to side directions.

• A high temperature safety control prevents overheating. See troubleshooting section.

• Equipped with an overheat switch that will shut down the unit.

• This heater was created using a high quality safety plastic.

• Periodic cleaning of the lter is recommended. Turn the heater O ( ) and unplug it. Allow it to cool. Remove the Filter Cover and

clean/vacuum the Filter.

• It is recommended that the Infrared Heater be cleaned at least once a

month and before o-season storage.

• Turn the heater O ( ) and unplug it. Allow it to cool.

• Use a dry cloth only to clean the external surfaces of the heater.

DO NOT USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.

• Clean the Infrared Heater using the above-mentioned steps.

Wrap the cord around the unit. Place in its original box and store

it in a cool, dry place.

• This heater does not disassemble.

• Press and hold both Thermostat Control Buttons ( ) for three seconds to change between Fahrenheit and Celsius and back.

NOTE: The Remote will not change between Fahrenheit and Celsius - only the controls on the heater.

CLEANING AND STORAGE

FAHRENHEIT TO CELSIUS

OPERATION (continued)

• The MyTemp Settings ( ) allow you to pre-set two favorite heat

settings and the timer function.

- To set a MyTemp preference, choose any heater setting (heat and/or

timer) and hold a MyTemp button for 3 seconds (Fig. 5), until it beeps.

The MyTemp Button will ash then illuminate and your favorite setting

is stored. It can be re-set at any time.

NOTE: Both MyTemp Settings will default to Constant High (L3) at rst

operation until you choose your favorite setting.

- To exit from a MyTemp Setting, simply press any Thermostat Control

Button ( ) to choose another setting.

• To select a pre-set MyTemp Setting – simply press the MyTemp Button and the heater will run in that favorite mode.

• To shut the heater o, press the Power Button ( ) and the heater will begin Powering Down as displayed in Status by a

blinking light. The heater will automatically shut o in about 60 seconds after the fan cools the internal components.

Fig. 6

Filter

Filter Cover

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-970 Series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HZ-970 Series Manual

Product: