Manual Honeywell HZ-826FTE (page 3 of 50) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460250

Zoom out

Zoom in

1/50

ENGLISH

IMPORTANT SAFETY

INSTRUCTIONS

Read all instructions before using heater.

1. Connect the appliance only to single

phase AC of the voltage specified on the

rating plate.

2. This appliance complies with EMC direc-

tive 89/336/EEC regarding radio and

television interference.

3. Keep combustible materials such as furni-

ture, pillows, bedding, papers, clothes

and curtains at least 90 cm from the

heater.

4. Extreme caution is necessary when any

heater is used by or near children.

5. Always unplug the heater when not in

use. Do not pull on the cord when discon-

necting it.

6. Do not cover. If covered, there is a fire risk.

7. DO NOT use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

8. This heater must not be located immedi-

ately below an electrical socket-outlet.

9. If the supply cord of this appliance is

damaged it must be replaced by a repair

shop appointed by the manufacturer, be-

cause special purpose tools are required.

10. Keep this heater clean. DO NOT allow

objects to enter any ventilation or exhaust

opening as this may cause electric shock,

or fire, or damage the heater.

11. Do not operate the unit before it is com-

pletely assembled according to the assem-

bly instructions.

ASSEMBLY INSTRUCTIONS

• This heater may be used with feet on the

floor or attached directly to the wall.

• For floor use, attach the feet to the lower

part of the heater by snapping each foot in-

to the matching holes (fig. 1).

• Firmly press each foot until a “click” is

heard. Place the heater on a firm, level,

open surface at least 90 cm away from any

other object. DO NOT use on an unstable

surface such as bedding or deep carpeting.

• For wall mounting, secure the wall attach-

ment clips into the wall with the screws pro-

vided. DO NOT install this heater in the im-

mediate surroundings of a bath, a shower

or swimming pool.

• Attach the wall spacers on the back of the

heater to keep the minimum distance to the

wall. Attach the heater to the mounting

clips, using the mounting holes on the back

of the heater (fig.2).

OPERATION INSTRUCTIONS

A) MODEL HZ-820E

• Turn the thermostat anticlockwise to its low-

est setting (d).

• Plug in the heater.

• Turn the thermostat clockwise to the highest

temperature setting, for a rapid warming

(fig.3).

• When the room reaches a comfortable tem-

perature, turn the thermostat anti clockwise

until the heater switches off. At this setting,

the thermostat will automatically turn the

heater on (the pilot light illuminates) and off

(the pilot light goes out) to maintain the se-

lected temperature.

• To turn the heater off, turn the thermostat an-

ti clockwise to the lowest setting (d) and un-

plug the heater.

B) MODELS HZ-821E, HZ-822E,

HZ-825TE

• Turn the switch to (0).

• Plug the heater into an outlet.

• Turn the switch to the desired power, (I-Low,

II-Medium, III-High) (fig. 4).

• Turn the thermostat clockwise to its highest

setting for a rapid warming.

• When the room reaches a comfortable tem-

perature, turn the thermostat anticlockwise

until the heater switches off. At this setting,

the thermostat will automatically turn the

heater on (the pilot light illuminates) and off

(the pilot light goes out) to maintain the se-

lected temperature.

• To turn the heater off, turn the switch to the

(0) position and unplug it.

C) TURBO

MODELS HZ-823FE, HZ-824FE

AND HZ-826FTE ONLY.

• Turn the switch to (0).

• Plug the heater into an outlet.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-826FTE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HZ-826FTE Manual

Product: