Manual Honeywell HYF500 (page 3 of 24) (English, French, Spanish)

723860

Zoom out

Zoom in

1/24

A. BASE ASSEMBLY

• Align the front and back base pieces and gently push the halves until the pieces snap securely

together. (Fig 3).

B. SECURING THE TOWER FAN TO THE BASE

• At the base of the housing, remove the locking nut and set aside (Fig. 4)

• Carefully lift the fan housing (Fig. 5) and place the power cord through the center of the base.

• Lower the fan housing into the base (Fig. 6).

• Take the locking nut and thread the power cord through the locking nut and move the nut up

the power cord, (Fig.7). Attach the locking nut to the fan housing by turning clockwise until fully

tightened.

• The fan cord can exit either side of the base; choose which one is closer to your outlet. (Fig. 8)

• The back of this fan is intentionally closed. This allows the air intake and exit to happen at the front

grille. This aerodynamic cross-flow design harnesses the Turbo Force® power of your fan!

Note: DO NOT operate the tower fan unless it is in its proper, upright position.

• Be sure the fans are in the off position.

• Place your fan on a dry, level surface.

• Plug the power cord into a polarized 120-volt AC wall outlet, your fan is now ready to be used.

• To move the fan, turn the fans to OFF, unplug the unit from the wall outlet and pick the unit up

by the concealed handle located at the back of the top fan.

ASSEMBLY INSTRUCTIONS

OPERATION

Fig. 8

Fig. 3

Fig. 6

Fig. 7

Fig. 4 Fig. 5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HYF500 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HYF500 Manual

Product: