Manual Honeywell HT-216E (page 4 of 50) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460299

Zoom out

Zoom in

1/50

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions before using this fan.

2. Only use this fan as described in this manual. Other non-

recommended use may cause fire, electric shock, or injury.

3. Only connect the fan to a single-phase power socket with the

current as stated on its type plate.

4. Connect power after the fan has been fully assembled. Unplug

from outlet when moving fan from one location to another,

before putting on or taking off parts and before cleaning.

Disconnect the fan when not in use. Do not tug at the power cord

to disconnect the plug.

5. Supervision is needed when the fan is used anywhere near

children. This appliance is not intended for use by children or

other persons without assistance or supervision if their physical,

sensory or mental capabilities prevent them from using it safely.

6. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person in

order to avoid a hazard.

7. Unwind the power cord completely. An incompletely unwound

power cord can lead to overheating and cause a fire. Do not touch

the power cord with wet hands. Position the power cord so that

nobody can trip over it and where the socket can be reached

easily.

8. Do not use an infinitely variable speed controller. This can lead

to overheating, fire, electric shock or faults in the appliance.

9. Do not operate the fan without the protective front and rear

grilles in position. Do not touch the rotating fan blades with any

part of the body. This can cause personal injury and damage.

10. Never insert fingers, pencils, or any other object through the

grille when fan is running.

11. Do not operate the fan if it is damaged or might be defective,

or if he is not working properly. Remove the power plug from the

socket.

12. Do not use the fan anywhere near easily inflammable gases or

substances such as solvents, lacquers, glues etc.

13. The fan is only designed for private use in indoor rooms and

is not intended for outdoor or for commercial use. Do not use the

fan anywhere near a bathtub, a shower or a swimming pool, or

anywhere else where water could splash.

14. Do not plunge the fan into water or any other liquids and do

not pour water or any other liquids over the fan.

15. Place the fan on a firm, even, dry surface. Be sure the fan is on

a stable surface when operating to avoid overturning. Make sure

the fan is standing securely so that it cannot tip over or fall down.

Maintain a safety distance of at least 50 cm from other objects.

16. Clean the fan regularly by following the cleaning instructions.

COMPONENTS

1. Front Grille

2. Blades

3. Plastic Nut

4. Rear Grille

5. Motor Shaft

6. Clutch Knob

7. Motor Housing

8. Tilt Adjusting Knob

9. Speed Knob

10. Power Supply Cord with Plug

11. Pedestal

12. Chassis

ASSEMBLY INSTRUCTIONS

Assembly of Fan Pedestal onto Chassis

1. Take the chassis and pedestal parts from the packing box and

unscrew the plastic nut on the pedestal (Fig. 1).

2. Insert the pedestal into the chassis by pushing down until it

locks into the chassis (Fig. 2).

3. Tighten the screw from the chassis to lock the pedestal (Fig. 3).

Assembly of Blade and Grilles

1. Remove the plastic nut on the motor shaft by turning it

counter-clockwise.

2. Place the rear guard on the motor shaft so that the handle is

at the top.

3. Screw on plastic nut clockwise, securing the fan guard to the

motor shaft (Fig. 4).

4. Remove and discard the small plastic sleeve on the motor shaft.

5. Loosen the retaining screw of the blade.

6. Place the fan blade on the motor shaft, making sure the fan

blade retaining screw fits into the slot of the motor shaft then

tighten the screw (Fig. 5).

7. Secure both guards firmly by tightening the screws (Fig. 6).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HT-216E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HT-216E Manual

Product: