Manual Honeywell HS-1040RE (page 8 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

460307

Zoom out

Zoom in

1/78

ENGLISH

4. Place the fan on a firm, even, dry surface. Make sure

the fan is standing securely so that it cannot tip over or fall

down. A safety distance of at least 50 cm from other

objects must be observed.

MOUNTING INSTRUCTIONS

1. Loosen the four cross recess screws (2) and screw nuts

on the base (1). Fit the mounting rod (3) onto the base,

push the base cover (5) upwards and secure the mounting

rod to the base with the four cross recess screws and

screw nuts. Push the base cover downwards so that it

covers the cross recess screws.

2. Turn the retainer ring (4) on the mounting rod (3) in an

anti-clockwise direction. Pull the telescopic rod (6) right

out of the mounting rod and tighten the retainer ring by

turning it in a clockwise direction.

3. Fit the fan motor (8) onto the telescopic rod (6) and

tighten the retainer screw (7) with a screwdriver.

4. Loosen the plastic nut (10) on the spindle (9) in an anti-

clockwise direction and remove it.

5. Fit the rear grid (11) onto the front of the fan motor (8)

so that the transport handle (12) is pointing upwards and

the track openings in the grid are resting at the side and

below the spindle (9) on the track bars of the fan motor.

6. Secure the rear grid (11) by tightening the plastic nut

(10) in a clockwise direction.

7. Mount the fan blade (13) onto the spindle. Make sure

that the retainer screw (14) on the side of the fan blade is

over the protrusion (15) on the spindle.

8. Loosen the connecting screw (17) and nut in the frame

of the front grid (16) and open the six connecting clips

(18).

9. Fit the front grid (16) into the retainer on the underside

of the rear grid (11) and adjust the holes for the connec-

ting screws (17 on the upper side so that they are super-

imposed. First fix the two grid halves with the connecting

screw and nut. Tighten this with a screwdriver. Then press

the six connecting clips (18) so that they enclose the front

grid.

10. Make sure that all parts of the fan have been mounted

according to this manual, and that all the parts are secure-

ly fixed so that they cannot become loose.

REMOTE CONTROL

1. Put two batteries (Type AAA, 1.5V) into the battery

compartment (21) of the remote control (20) and close the

cover (22) until it clicks into place. The maximum distance

for transmitting signals from the remote control to the fan

is 5 meters. Make sure that no objects are hindering signal

transmission.

2. Take the protective film off the remote control.

3. Use only batteries of Type AAA, 1.5V and after replacing

the old batteries dispose of them for recycling and accor-

ding to your local regulations.

4. If you do not wish to use the remote control (20) for a

longer period (4 weeks or more), take the batteries out of

the remote control.

USER INSTRUCTIONS

1. Place the fan on a firm, even, dry surface. Make sure

the fan is standing securely so that it cannot tip over or fall

down. A safety distance of at least 50 cm from other

objects must be observed.

2. Make sure that the fan is switched off. Insert the power

plug (19) into the socket. You can control the fan manually

on the control panel (23) or with the remote control (20).

3. Turn the retainer ring (4) on the mounting rod (3) in an

anti-clockwise direction and adjust the telescopic rod (6)

to the desired position. Then tighten the retainer ring. Loo-

sen the rotary knob (30) at the side of the fan motor and

tilt the fan to the desired angle. Tighten the rotary knob.

Changes to height and the tilt angle must only be made

when the fan is not operating.

4. Press the power key (24) to switch the fan on. The

fan starts operating at low speed. The first two fields on

the speed indicator light up green. Please note: The power

and speed indicators are combined in one key on the con-

trol panel of the fan, but on the remote control they are

separate.

5. By pressing the speed key (25) repeatedly you can

preset the fan speed:

Low – 2 green fields

Medium – 4 green fields

High – 6 green fields

6. Press the oscillation knob (29) on the top of the fan

motor (8) downwards to start the oscillation. To stop the

oscillation, pull the knob outwards.

7. The fan is equipped with a timer function. This function

switches the fan off after a preset time period of between

one and eight hours. You can preset the desired running

time by pressing the timer key (27) repeatedly. The

selected number of hours lights up green on the timer

indicator (28). To deactivate the timer function, press the

timer key repeatedly until the timer indicator goes off.

8. Use the transport handle (12) to transport the fan. Befo-

re transport, switch the fan off with the power key (24)

and remove the power plug (19) from the socket.

9. When you no longer wish to use the fan, switch it off

with the power key (24) and remove the power plug (19)

from the socket.

OM_HS-1040RE.qxd 22.02.2006 16:46 Uhr Seite 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HS-1040RE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HS-1040RE Manual

Product: