660644
56
Zoom out
Zoom in
Previous page
1/156
Next page
Configuration
56
Note If the DVR is configured for DHCP or an ADSL network, the
DVR’s IP address might change whenever the unit is turned on.
Modem Setup
1. Highlight the Modem tab, and the Modem screen (Figure 3-29) displays.
Figure 3-29 Modem Setup Screen
Note If the RS232 port is in use for remote control, networking cannot
be configured for a modem.
2. Highlight Enable and press to toggle between On and Off. You will only be
able to change the settings if Modem is enabled.
3. Highlight the box beside Baud Rate and press . A list of baud rates ranging
from 300 to 115,200 appears.
4. Highlight the box beside Data Bit and press . Choose between 7 bit and 8 bit
formats.
5. Highlight the box beside Stop Bit and press . Choose between 1 and 2 Stop
Bits.
6. Highlight the box beside Parity and press . A drop-down list appears. You can
select from None, Odd or Even parity.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HRXD16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HRXD16 in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info