660644
40
Zoom out
Zoom in
Previous page
1/156
Next page
Configuration
40
2. Highlight the Site box and press . A virtual keyboard appears that you can use
to enter a Site Name.
3. Once you have entered your title, highlight OK and press .
4. Highlight the box beside System ID and press . Change the number by
highlighting it and using the Up and Down arrow buttons to increase and
decrease the number from 0 to 99.
Note The System ID number is used to identify the unit when it is
connected with other DVRs through the RS485 port. You cannot
use the same ID number for two or more DVRs that are in the
same RS485 network. It is possible to have multiple DVRs with
System ID 0 that are in the same area as long as they are not
part of an RS485 network. If this is the case, all will be controlled
at the same time when using the infrared remote control.
5. Highlight the box beside Language and press . A drop-down menu displays
the available languages. Highlight the desired language and press .
6. The box beside Version displays the software version of the DVR. To upgrade the
software:
a. Connect a USB device containing the upgrade package file to the DVR.
b. Highlight Upgrade… and press . The Upgrade screen appears. The
screen displays the upgrade package file names that are available. The .rui
indicates that the file is for software upgrades.
c. Select the desired file and press .
d. Highlighting Install and pressing will install the selected software
package. Highlighting Cancel and pressing will close the window without
upgrading the software.
If the upgrade package file is not installed on the DVR properly, you will get
an error message.
e. The system restarts automatically after completing the upgrade.
Figure 3-7 Upgrade Screen
Note Upgrade will be deactivated if the hard disk drive has not been
formatted as it requires the space for temporary files when
upgrading the system.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HRXD16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HRXD16 in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info