651400
46
Zoom out
Zoom in
Previous page
1/150
Next page
www.honeywell.com/security
46 | HRGX DVR User Manual
Configuring PTZ Settings
Before you can control a PTZ camera, you must configure the connection settings in the Camera
Management menu. This section describes how to configure PTZ connection settings, presets,
patrols, and patterns.
Configuring PTZ Connection Settings
The PTZ connection settings on the DVR must match the settings of the camera. For example,
if the PTZ camera has a baud rate as 115200, you should select 115200 in the baud rate field.
To configure the PTZ connection settings:
1. Go to Menu > Camera > PTZ > General.
2. Configure the following settings:
3. To copy the same settings to one or more additional PTZ cameras, click Copy, select the
channel(s) that you want to copy the settings to, or click Analog to select all channels, and
then click OK
4. Click Apply to save your settings.
•Camera
Select the PTZ camera you want to configure settings for.
•Baud Rate
Select your PTZ camera’s baud rate setting.
Data Bit
Select your PTZ camera’s data bit setting (
5
,
6
,
7
, or
8
).
•Stop Bit
Select your PTZ camera’s stop bit setting (
1
or
2
).
•Parity
Select your PTZ camera’s parity setting (
None
,
Odd
, or
Even
).
•Flow Ctrl
Select a flow control setting (
None
,
Software
, or
Hardware
).
PTZ Protocol
Select your PTZ camera’s protocol.
•Address
Enter your PTZ camera’s address.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HRGX85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HRGX85 in the language / languages: English as an attachment in your email.

The manual is 28,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info