460260
7
Zoom out
Zoom in
Previous page
1/86
Next page
ENGLISH
6
FIRST TIME OF USE
1. Read through all the instructions before starting to use
the heater.
2. Unpack the heater, all the accessories and the power
cord. Remove all the packaging materials and dispose of
them for recycling.
3. Mount the castors (9) and feet (10) according to
“Mounting the castors and feet”.
4. To get rid of the smell that develops during the first time
of use, allow the heater to operate with maximum output
for 2 hours.
5. It is normal for the heater to make noises during the
first time of use.
MOUNTING THE CASTORS AND FEET (Fig. 1)
1. Stand the heater upside down. The appliance is stan-
ding upside down when the control panel (1) is at the bot-
tom.
2. Press the castors (9) firmly onto the pegs of the moun-
ting tracks (7). You hear them “click”.
3. Fit the mounting tracks with the mounted castors on
each side of both outer fins, Take the wing bolt of the U
bracket (8) off. Hook the U bracket with the hook side onto
the mounting track. Push the bracket with the thread side
between the fins and push the thread side through the
second opening in the mounting track. Using the wing
bolt, fix the two mounting tracks firmly onto the heater.
4. Check that the mounting tracks are firmly fixed to the
heater and cannot become loose.
5. Stand the heater upright on the castors.
Only HR-40715E (Fig. 2)
6. This heater has two castors (9) and two feet (10). Press
the castors firmly onto the pegs of one of the mounting
tracks and the two feet on the other one.
7. Fit the mounting track with the feet (10) at the front on
the two outer fins and the mounting track with the castors
(9) onto the two back fins. Make sure that the feet always
point to the front, so that the heater is standing securely
and cannot tip over to the front. Secure the mounting
tracks as described under “mounting the castors and feet”,
No. 3-5.
USER INSTRUCTIONS
1. Only locate the heater on a firm, even surface where the
heater cannot fall over, fall down or be knocked over. For
Model HZ-40715E make quite sure that the feet (10) are
pointing forwards
2. Check that the toggle switch (2) is on 0, so that the hea-
ter is switched off. Do not touch the cord with wet hands.
3. Make sure that the heater is not covered up.
4. Using the toggle switches (2), set the heater to one of
the three operating speeds:
Power setting in Watts:
5. Turn the thermostat switch (4) clockwise to the highest
position. The power lamps (3) of the activated toggle swit-
ches light up.
6. When the desired room temperature has been reached,
turn the thermostat switch (4) anti-clockwise intil you hear
it “click”. The heater is now switched off and the power
lamps go off.
7. Now turn the thermostat switch (4) slightly back. The
heater will now switch on and off automatically and main-
tain the desired room temperature.
8. The further clockwise you turn the thermostat switch,
the higher the room temperature will be.
9. Before you handle, move or clean the heater, switch it
off with the toggle switches (2) and turn the thermostat
switch (4) to the lowest position. Pull the power plug out
of the power socket and allow the heater to cool for at
least 20 minutes. Always use the transport handle (15) to
transport the heater.
Timer (Model HR-40920TE only)
1. Set the current time with the pointer on the clock.
2. Preset the desired heating period of the radiator by
pushing in the desired number of little grey keys (14)
grouped round the centre plate of the timer. Each key cor-
responds to 15 minutes running time. Please note: All keys
are pushed in ex factory.
3. The heater switches on and off automatically at the
times set by pushing the grey keys in. The selected switch
on and off times can be changed by pushing the grey keys
back into their original positions and setting new times.
4. If you wish to use the heater manually without the timer,
all the keys must be pushed in.
Model Setting I Setting II Setting I + II
HR-40715E 600 900 1500
HR-40920E 800 1200 2000
HR-40920TE 800 1200 2000
HR-40920FE 800 1200 2000 + 500 W turbo
HR-41120E 800 1200 2000
HR-41125E 1000 1500 2500
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HR-41125E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HR-41125E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info