723820
3
Zoom out
Zoom in
Previous page
1/11
Next page
3
SETUP
Select a firm, level, and flat location.
When operating, large volumes of air are drawn toward the air purifier. Surrounding areas should be cleaned
and/or vacuumed frequently to prevent build-up of dust and other contaminants. This may also help
prolong the life of the filter. If the unit is placed on a light colored carpet, a small mat or rug should be used
underneath to prevent permanent staining. This is especially important in homes with contamination from
smoking, fireplaces, or where candles are burned.
Ensure the front of the unit faces away from the closest wall or furniture.
Ensure no grilles are blocked.
The HEPA Filters and Odor Reducing Pre-filter are supplied within the air purifier. New air purifiers have their filters
wrapped to ensure purity, and are labeled to help identify the proper replacement filter (
Type
R
A
A
R
Certified HEPA Filter
and Type
R
A
A
R
Odor Reducing Pre-filter).
Before using your new air purifier you must remove the wrappers covering the filters and
pre-filter. Make sure the air purifier is OFF and unplugged. Press the two hand symbols (
) on the
front grille to release it from the unit and pull the grille toward you to remove it (see Fig. 2). Grasp the sides of
the filter frame near its top end and pull outward. Repeat for the second and third filters (if applicable).
Remove protective wrap from the filters (including the pre-filter) that have
been supplied with your air purifier.
Place the HEPA filters into the air purifier housing. Ensure that the removal
“pull” tabs are facing outward (this will facilitate filter removal later). Place
the pre-filter in front of the HEPA filters. Secure the edges of the pre-filter to
fasteners located around the edges of where the HEPA filters are inserted.
These will hold the pre-filter securely in place.
Replace the front grille by placing the tabs on the bottom of the grille into the
slot(s) on the unit. Gently push the top of the grille into place by pressing on
the hand symbols (
) to secure in place.
INSTALL HEPA FILTERS AND ODOR REDUCING PREFILTER
Fig. 2
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HPA8350 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HPA8350 series in the language / languages: English as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info