724049

Honeywell HHF565 series Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
Model HHF565 Series – Digital TurboForce® Heater Operation
Turn heater on by pressing the Power Button (
).
The Power Indicator will illuminate and the heater
will start in the Low (
) heat level setting (Fig. 4).
This heater has two operational modes, which can be
chosen using the red switch on the back of the unit
(Fig. 3):
Continuous heating (
) – heater will run until it
is manually shut off.
AutoOff (
) mode - heater will automatically shut
off after 8 hours each time that you use the heater.
This built-in feature helps ensure that the heater is not
accidentally left on for an extended period of time.
NOTE: See the SafeGuard® Auto-Off Feature section for more information on this feature.
This heater comes pre-set from the factory with the AutoOff mode engaged. When the unit is turned on,
the AutoOff icon (
) will be illuminated on the top of the controls. All features are functional while operating in
the AutoOff mode.
Should you NOT want the heater to automatically shut off after 8 hours, switch to Continuous heating by simply
pressing the red switch on the back of the unit. Once selected, the Continuous heat icon (
) will illuminate on the
top of the control panel.
To select a Heat Setting, press (
):
1. For Low (
), this setting uses 750 watts of power
2. For High (
), this setting uses 1500 watts of power
NOTE: The Low (
) setting does not require as much electricity to operate. It is more energy efficient and may
be a better option if you are concerned about saving energy.
To use the Fan only (no heat), press the Fan button (
).
To set the thermostat, continue to press the Heat Level button (
) until Auto is illuminated. There are 4 pre-set
comfort settings from which to choose: 65°, 70°, 75°, 80°. Continue to press the Heat Level button to select your
desired room temperature setting. The heater will operate at HIGH heat in order to reach this desired temperature.
NOTE: If the Current Temperature is higher than your Desired Temperature, the heater will be off until the room
temperature falls below your desired temperature.
To set the Timer, press the (
) button to select 1, 2, 4, or 6 hour setting. The heater will run for that chosen period
in the selected mode and automatically shut off after the desired time has passed.
OPERATION
Fig. 3
Fig. 4
Fan Level
Heat Levels
Heat Temperature
SafeGuard® Auto Shut-Off
Auto Heat
Oscillation
60º 90º 120º
Power Button
Fan Button
Timer Button
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HHF565 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HHF565 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info