723816

Honeywell HFD320 - Air Genius 5 Manual

6
Zoom out
Zoom in
Previous page
1/24
Next page
6
• The timer option on the left of the control panel (see Fig. 5) allows you to select
how long the unit will run before it turns off automatically.
• ‘Tap’ the Timer symbol ( ) to shift through the options. When pressed the time
will move to the next highest setting until it is on ‘12’ (which means it will stay
on for 12 hours and then shut-off). If you tap the Timer symbol while it is on
‘12’ the timer option will turn off and the unit will run continuously. If you ‘tap’ it
again, it will start back at ‘2’.
• Toggle through the hour options until the LED light is illuminated behind the
number of hours you want the unit to operate for. If the Auto-off Timer is not
illuminated, the air purifier will run continuously.
SETTING THE TIMER OPTION
Fig. 5
ELECTRONIC FILTER CLEAN REMINDER
• This model air cleaner has an electronic filter check to remind you when to
check the washable ifD
®
filter based on the air purifier’s hours of use.
• When the ifD
®
filter needs to be cleaned, the LED light ‘bar’ will remain full and
the light will be illuminated until it is RESET. You may unplug the air cleaner
without interrupting the filter check.
• You should periodically check the filter. Depending on operating conditions,
the filter should be cleaned at least once every three months.
To RESET the Electronic Filter Check:
• When the filter monitor light remains on, it is time to check/clean the
ifD
®
filter and reset the filter monitor, if needed.
• After the filter has been cleaned and placed back in the unit (dry), you will want
to reset the indicator. To do this, ‘touch’ the ‘OK’ button for 2 or more seconds
until the LED light is off and the fill ‘chart’ is not illuminated.
Fig. 6
Fig. 7
REMOVING THE FILTER
CAUTION: Turn off the unit and wait 60 seconds before removing
the grille to clean filters.
The ifD
®
filter is supplied within the air cleaner.
• Turn-off the air cleaner. Wait 60 seconds and unplug the unit before removing
the grille. While pressing down on the notch along the rear grille, pull the grille
down and towards you and remove it (Fig. 8). Gently push along the edge of
the filter frame and pull forward.
• To place the filter back into the air cleaner housing, insert at the bottom and ensure that it is pushed
in as far as it can go and then push in from the top. To replace filter grille, align pin on bottom of grille
with opening on the housing and snap back into place. If the filter grille is not properly inserted, your air
purifier may not turn on. Ensure it is properly installed and there is no gap between grille and the housing.
NOTE: If the odor reducing pre-filter is used in lieu of the permanent washable pre-filter, it will need to be
replaced approximately every 3 months.
Fig. 8
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HFD320 - Air Genius 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HFD320 - Air Genius 5 in the language / languages: English, Spanish as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info