723827
4
Zoom out
Zoom in
Previous page
1/29
Next page
6 7
USING YOUR HUMIDIFIER – HEV620
Power
1. Plug humidifier into a 120V outlet.
CAUTION: To avoid electric shock, DO NOT plug humidifier into outlet with
wet hands.
2. Press Power Button (A).
Humidifier will turn on to high output and high humidity settings. Press again to turn off.
If humidifier was programmed before turning off, previous settings will be remembered.
Unplugging the humidifier resets to default settings.
Moisture Output
3. Press the Moisture Output button (B) to toggle through low, medium, and high
moisture output settings.
A higher setting will provide more moisture output. The fan will pull more moisture off the
Wicking Filter and into the air. The water level in the Water Tank will decrease faster with a
higher setting, since more moisture is going into the air.
A lower setting will provide less moisture output. The fan will run quieter, and the Water Tank
will not have to be filled as frequently, since less moisture is going into the air.
NOTE: While the humidifier is operating, you will hear the fan running but will not see the
moisture output. This is normal for an evaporative humidifier.
Humidity Control
4. Press the Humidity Control arrows (C) to set the desired humidity level.
To scroll through the numbers faster, press and hold the arrow for 3 seconds.
Release the button once the desired level is shown. Display will blink three times showing
the SET humidity level, then the display will return to show the current room humidity level.
CURRENT will illuminate on the display to indicate the curent room humidity level.
Key
A. Power
B. Moisture Output
C. Humidity Control
D. Timer
E. Check Filter
F. Refill
Symbols
(Canada only)
B. Moisture
Output
D. Timer
E. Check
Filter
F. Refill
A
B
C
D
E
F
HEV620 Digital Display
The humidistat can be set between 30%-69%. Below 30%, LO will illuminate on the display
to indicate the minimum humidity level. Above 69%, the display will show HI to indicate the
maximum humidity level is set.
NOTE: The % number displayed on the control panel represents the relative humidity
(RH) as measured at the Humidistat sensor. The relative humidity in your room may
vary from the number displayed on the humidifier. To measure the RH level in your
room, consider using a Honeywell humidity monitor (HHM10 or H10C) that can be
moved around in the room.
Humidity Reached (US models only)
When the set humidity level is reached HUMIDITY REACHED will appear on the display
and the humidifier will turn off. As long as HUMIDITY REACHED is illuminated, the
fan will not run.
Once the humidity level drops below the set level, HUMIDITY REACHED will disappear
and the humidifier will start running again.
To increase the set humidity level, press the Humidity Control arrows .
Timer
Press the button (D) to set the Timer to 4, 8 or 12 Hours.
NOTE: Humidifier will continue to cycle on and off to maintain the set humidity level while
the Timer is set. At the end of the timed cycle, the humidifier will power off, regardless of the
humidity setting. Any time the humidifier is manually turned off (with the power button or by
unplugging) the timer will reset to OFF setting.
USING YOUR HUMIDIFIER – HEV620 (CONTINUED)
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEV615 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEV615 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 18,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info