660638
97
Zoom out
Zoom in
Previous page
1/180
Next page
Configuring Network Settings | 97
800-21090V2 - A - 03/2016
3. Configure the following settings:
4. Click Apply to save your settings.
5. If you want to save your settings and exit the SETTING menu, click OK.
Configuring Multicast Settings
Multicast allows for simultaneous real-time monitoring of live video from the NVR at multiple
remote locations over the network.
To configure multicast settings
1. In the SETTING field in the Main Menu, go to NETWORK > Multicast.
Figure 7-12 Network Multicast Settings Window
2. On the Multicast page, select the Enable check box to enable multicast.
3. In the IP Address box, enter a multicast IP address. The address must be valid for
multicasting and should be in the range 224.0.0.0 to 239.255.255.255 for IPv4 or have the
prefix ff00::/8. An address in the range 239.252.0.0 to 239.255.255.255 is recommended.
4. In the Port box, enter a multicast port number or use the default setting (36666).
5. Click Apply to save your settings.
•SNMP Version Select the check boxes of the SNMP version(s) that you are
using.
SNMP Port The default setting is 161.
Read Community The default setting is public.
Write Community The default setting is private.
Trap Access Enter the IP address of the computer running SNMP software.
Trap Port The default setting is 162.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEN16142 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN16142 in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN16142

Honeywell HEN16142 User Manual - English - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info