660637
41
Zoom out
Zoom in
Previous page
1/108
Next page
Configuration | 41
800-21261V3 - A - 05/2016
Figure 3-7 TCP/IP Configuration Interface
Table 3-5 TCP/IP Configurations
Configuration Description
Mode There are two modes: STATIC and DHCP.
The IP address, submask, and gateway is inactive and
not configurable when you select the DHCP mode to
automatically search for the IP address.
•If you select STATIC mode, then you need to manually
configure the IP address, submask, and gateway.
•If you select DHCP mode, then you can only view the IP
address, submask, and gateway. You can not configure
these values.
If you switch from the DHCP mode to the static mode,
then you need to reset the IP parameters.
The IP address, submask, gateway, and DHCP are
read-only values when the PPPoE dial is OK.
MAC Address Displays the MAC address. This field is not configurable.
MTU Use the default MTU (maximum transmission unit) value.
IP Version Select the IP version, either IPv4 or IPv6.
You can use either version to access the camera’s IP address.
IP Address 1. Use your PC’s keyboard to enter the IP address.
2. Set the Subnet mask and Default gateway.
Subnet Mask If you selected the STATIC mode, then enter a Subnet Mask
value.
Default Gateway If you selected the STATIC mode, then enter a Default
Gateway value.
Preferred DNS Enter the DNS IP address.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEN16122 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN16122 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN16122

Honeywell HEN16122 User Manual - English - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info