660633
37
Zoom out
Zoom in
Previous page
1/108
Next page
Configuration | 37
800-21261V3 - A - 05/2016
Configuring Snapshot Settings
Figure 3-3 Snapshot Settings Interface
Resolution The NVR system supports various resolutions, which you can
select from a dropdown list.
Note The selection is different for each NVR series. The
Performance Series Full PoE Network Video
Recorders can automatically detect a connected 720p
or 1080p camera’s configured resolution (as 720p or
1080p) But you must manually configure the resolution
(960H or below) for analog cameras, and 1080p HQA
cameras that are in SD mode.
Frame Rate PAL: 1 to 25 fps
NTSC: 1 to 30 fps
Bit Rate Type Select either CBR (constant bit rate) or VBR (variable bit rate).
Note If your device is connected to the NVR through ONVIF,
then you can not select VBR. If your device is
connected to the NVR through a private protocol, then
you can select either CBR or VBR.
Bit Rate Main Stream: Select a bit rate to change the video quality.
The larger the bit rate, the better the video quality. We
recommend that you accept the default bit rate. The GUI also
displays the reference bit rate range and frame rate for the
selected resolution.
Extra Stream: In DBR, the bit rate is the maximum value. For
dynamic video, the NVR system will decrease the frame rate
or video quality to maintain the bit rate. The value is null for
VBR mode.
Enable Watermark Allows you to verify that the video has not been tampered.
Watermark String Enter the text for the watermark. The default watermark is
DigitalCCTV. The maximum text length is 85 characters. You
can use only letters, numbers, and an underline.
Table 3-2 Encoding Configurations
Setting Description
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEN08112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN08112 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN08112

Honeywell HEN08112 User Manual - English - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info