660630
161
Zoom out
Zoom in
Previous page
1/180
Next page
800-21090V2 - A - 03/2016
A
Connecting Alarm Input/Outputs A
This appendix contains the following sections:
Before Connecting Alarm Inputs and Outputs, page 161
Alarm Input and Output Rear Panel Connections, page 161
Guidelines for Connecting Local Alarm Input Ports, page 162
Guidelines for Connecting Alarm Output Ports, page 162
Before Connecting Alarm Inputs and Outputs
Ensure that the alarm input mode is set to ground.
Ensure that the signal is grounded.
Know that the alarm inputs require low-level voltage signals.
Ensure that the alarm input mode is set to either NC (normally closed) or NO (normally
open).
Use a relay if you are connecting two NVRs, or a NVR plus another device, to separate them.
Do NOT directly connect the alarm output port to a high-power load. The load should be
less than 1 A to avoid damage.
•Use the
contactor
to make the connection between the alarm output port and the load.
Alarm Input and Output Rear Panel Connections
The connections for the alarm input and output channels are described below:
Input/Output Description
1 to 4 Alarms inputs 1 to 4. The inputs becomes active with low voltage.
NO1 C1, NO2 C2 Normally open activation outputs (on/off)
Ground
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HEN04112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN04112 in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN04112

Honeywell HEN04112 User Manual - English - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info