Manual Honeywell HEN04112 (page 105 of 180) (English)

660630

105

Zoom out

Zoom in

1/180

Configuring Event Settings | 105

800-21090V2 - A - 03/2016

Figure 8-5 Motion Detection Configuration Tab

2. On the Motion Detect tab, select the actions that you want the system to initiate when a

motion detection event occurs:

3. Click Apply to save your settings.

•Alarm Out

Select the alarm output(s) (

) that you want to activate. In the

Latch

box, specify the amount of time (1–300 s) to delay the alarm output

signal after a motion detection event is triggered.

•Show Message

Select the check box to enable a pop-up message on your local host PC.

•Alarm Upload

Select the check box to enable the system to upload an alarm signal to

the network (including to an alarm center and/or web client).

•Send Email

Select the check box to enable the system to send an email notification.

If the

Snapshot

function is enabled, an image can be attached to the

email.

• Record Channel

Select the channel(s) that you want to record. In the

Delay

box, specify

the amount of time (1–300 s) to delay recording after a motion detection

event is triggered.

Note You also need to set the motion detection recording period.

Go to Storage > Schedule to configure the current channel

for scheduled recording. See Configuring the Video

Recording Schedule on page 63.

• PTZ Activation

Select the check box to activate PTZ functions, and then click

Select

. In

the

PTZ Activation

window, for each PTZ camera, select the preset,

tour, or pattern that you want to be called when a motion detection event

occurs, and then click

•Tour

Select the check box to enable a tour of the selected channels.

•Snapshot

Select the check box to take a snaphot of selected channels.

• Buzzer

Select the check box to activate a buzzer noise at the NVR.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HEN04112 in the language / languages: English as an attachment in your email.

The manual is 14,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HEN04112

Honeywell HEN04112 User Manual - English - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HEN04112 Manual

Product: