FILLING
• We recommend that the humidifier be disinfected prior to first use. Please see
CLEANING instructions.
• Remove the water tank by grasping handle and pulling straight up. Set aside
(Fig. 1).
• Lift off the motor housing. Remove the Cool Moisture filter pad from the base
before filling the unit with water (Fig. 2). Run it under cold water; this will help
reduce residue build-up. Turn the filter upside down before repositioning it in the
humidifier. Place it back in the humidifier wet.
Do not squeeze or wring out the filter. To help extend the life of your filter, repeat
this step every time you fill your humidifier.
• Turn the Water Tank upside-down so that the fill cap is facing up.
•
Fill the Water Tank with COOL tap water (Fig. 3). Distilled water is not necessary
as the water is filtered by the Cool Moisture filter.
DO NOT USE HOT WATER.
• Replace the fill cap .
CAUTION: WHEN CARRYING THE FILLED WATER TANK, PLEASE USE THE HANDLE
AND PLACE YOUR OTHER HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.
• Turn Water Tank right-side up.
• Position Water Tank in the humidifier and push it into place.
• Some water will empty into the Reservoir Base when the filled Water Tank is
properly positioned.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If
it has to be moved, unplug the humidifier and remove the Water Tank first.