613651
29
Zoom out
Zoom in
Previous page
1/90
Next page
HCE80(R) / HCC80(R) Mounting and operation 25
Activating the cooling function at the CM927
The heating/cooling function is specified by
Parameter 4:HC in the installation mode.
1
Set the slide switch to the "OFF" position.
2
Press the and <, > buttons
simultaneously.
1:CL of the first parameter
level is displayed.
3
Press the > button to change to
the second parameter level.
1:Ot of the second parameter
level is displayed.
14
Press the + button until 4:HC is displayed.
5
If applicable, use the
and
buttons to select the setting "1" and
confirm with the OK button.
The cooling function at the
CM927 is activated.
Enabling the cooling function at the
underfloor heating controller
1
Keep the Mode button pressed
for at least 4 seconds.
The
LED indicates the activated mode:
LED
Meaning
Lights up green Cooling mode
active
Lights up red Heating mode
active
2
Change the setting by pressing
the installation button .
The underoor heating controller
switches back to normal mode
automatically after 60seconds.
You can also exit the installation
mode by pressing the Mode button.
!
Binding the room temperature setpoint cooling
The cooling function at the CM927 has
to be activated to this purpose.
1
Press and hold the installation
button on the underfloor heating
controller for 2 seconds.
The
LED lights up. The LED
of zone 1 flashes green.
2
Press the installation button twice
at the underfloor heating controller.
The LED of zone 1 flashes orange.
The underfloor heating controller
waits for the CM927 signal.
Setting the CM927 to the binding mode
1
Move the slide switch to
the "OFF" position.
2
Keep the
and
and < buttons pressed
simultaneously until InST CO is displayed
2
Send the binding signal by
pressing the OK button.
The cooling setpoint is assigned
to the selected zone.
The LED of the selected zone at
the underfloor heating controller
lights continuously orange.
If cooling is not activated, the
LED of Zone 2 ashes red.
!
Toggling between heating and cooling
at the CM927 operating device
The changeover from heating to cooling operation and
vice versa has to be carried out manually at the CM927.
1
Keep the
and
buttons pressed
for approx. 5 seconds until "Cooling" or
"Heating" respectively is displayed.
The CM927 operates in the displayed
operating mode with immediate effect.
Cooling with CM927
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info