613651
17
Zoom out
Zoom in
Previous page
1/90
Next page
HCE80(R) / HCC80(R) Mounting and operation 13
Installing an external antenna
Up to three underfloor heating controllers
can be connected to an antenna.
1
Only install the external antenna outside
metal housings (e.g. control cabinets).
2
Install the antenna at a suitable location near
the underfloor heating controller (3).
3
Strip the connections 5.5 mm (see
fold-out page, Fig. 5).
14
Connect the antenna (see fold-out page, Fig. 4 (9)):
Shield to Terminal 2, second conductor to Terminal 1
5
Close the terminals.
Operation with several underfloor heating controllers
If several underfloor heating controllers are operated
simultaneously, an antenna (internal or external)
may only be connected to one controller.
Closing the housing
1
Place the housing cover back on (see fold-out page).
2
Snap the left and right snap lock back into place.
3
Tighten the screws on the top.
Commissioning
During commissioning, room setpoint
generators/sensors and, if applicable, the
time programs of the central operating
devices are assigned to the temperature
zones of the underfloor heating controller.
1
Connect the underfloor heating
controller to the supply voltage.
The mains voltage LED (POWER) lights up.
LED displays at the underfloor heating controller
The LEDs on the underfloor heating controller
(see fold-out page, Fig. 3 (1, 2, 3)) indicate
the operating modes of the underfloor heating
controller and the installed temperature zones.
LED
Display
Meaning
POWER (green) Lights up Normal mode
(red)
Lights up Group alarm
Flashing Antenna fault display
(orange)
Rapid flashing No device installed
In normal mode the LEDs 1...8 show the position of
the thermal actuators (see fold-out page, Fig. 3 (7)).
LEDs 1...8 Meaning
Green Thermal drive opened
Off Thermal drive closed
Controller 1Controller 2Controller 3
B+ B+ B+
Antenna connection
5
14
B+ H/C TW
123456
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE80-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE80-R in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 29,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Honeywell HCE80-R

Honeywell HCE80-R User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info