724047
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
SAFETY FEATURES
CLEANING AND STORAGE
The Honeywell ComfortTemp™ 4 Ceramic Heater is equipped with several devices and features for added protection:
A 360° tip-over switch that disables the heater if it is tipped in any direction.
A high temperature safety sensor prevents overheating.
This heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should
it operate at a higher than normal temperature. If activated, the unit will need to be replaced.
This heater was built using a high temperature plastic and has a cool to touch housing and handle.
This heater is designed with thermal insulated wiring for heat resistance and reinforced wire connections
to help protect against loose connections.
This heater also has a SafeGuard® Auto ShutOff feature. If selected, this feature is designed to automatically
shut the heater off after 8 hours of continuous use.
The HCE645 Series models have a SafeGuard® Motion Sensor that shuts the heater off if an object
gets too close to the motion sensor.
It is recommended that the Honeywell ComfortTemp™ 4 Ceramic Heater be cleaned at least once a month and
before off-season storage.
Turn Off (
) and unplug heater. Allow unit to cool for 10 minutes.
Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES, POLISHES
OR ANY CHEMICAL SOLUTION.
Before storing, clean the Ceramic Heater using the above-mentioned steps. Wrap the cord around the unit.
Place in its original box and store it in a cool, dry place.
This heater does not disassemble.
TROUBLESHOOTING
Problem Solution
If your Honeywell ComfortTemp™
4 Ceramic Heater shuts off
unexpectedly or fails to operate,
one of your heater safety features
may have been activated to
prevent overheating.
Be sure heater is plugged in and that the electrical outlet is working.
Check for any obstructions. If you find an obstruction, turn the heater
OFF (
) and unplug it.
Allow the heater to cool completely, then remove the obstruction. Wait at
least 10 minutes, then re-plug the heater in and follow the OPERATION
instructions.
Model(s) Unit Dims Amps Unit Voltage Max Watts Max BTUs
HCE640 Series 7.9” L x 7.9” W x 23.4” H 12.5 120V, 60Hz 1500 5118
HCE643 Series 7.9” L x 7.9” W x 23.4” H 12.5 120V, 60Hz 1500 5118
HCE645 Series 7.9” L x 7.9” W x 23.4” H 12.5 120V, 60Hz 1500 5118
PRODUCT SPECIFICATIONS
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE645 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE645 series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info