723866
2
Zoom out
Zoom in
Previous page
1/12
Next page
1. WarningRead all instructions before using this heater.
2. WarningThis heater is hot when in use. To avoid burns, DO NOT let bare skin
touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and
keep them away from the sides and rear.
3. WarningExtreme caution is necessary when any heater is used by or near
children or invalids, and whenever the heater is left operating and unattended.
4. WarningAlways unplug heater when not in use.
5. WarningDO NOT operate an
y heater with a damaged cord or plug or after the
heater malfunctions, has been dropped or damaged in any manner. Discard heater
or return heater to authorized service facility for examination and/or repair.
6. WarningFor residential use only.
7. WarningDO NOT use outdoors.
8. WarningThis heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. NEVER locate heater where it may fall into a bathtub or
other water container.
9. WarningDO NOT run cord under carpeting. DO NOT cover cord with throw rugs,
runners, or similar coverings. DO NOT route cord under furniture or appliances.
Arrange cord
away from traffic area and where it will not be tripped over.
10. Warning – This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. DO NOT attempt to defeat this safety
feature.
11. WarningThis heater draws 2.1 amps during operation. To prevent overloading
a circuit, DO NOT plug the heater into a circuit that already has other appliances
working
.
12. WarningIt is normal for the plug to feel warm to the touch; however, a loose fit
between the AC outlet (receptacle) and plug may cause overheating and distortion
of the plug. Contact a qualified electrician to replace loose or worn outlet.
13. WarningTo disconnect the heater, first turn off the product, then grip the plug
body and pull it from the wall outlet. NEVER pull by the cord.
14. WarningDO NOT insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or damage the heater.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HCE100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HCE100 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info